README.md

rfid-db-tool

This little Python/Tk GUI tool was created for locally storing and managing RFID numbers list and uploading it to a doorlock embedded device using a binary protocol through a serial UART interface.

The embedded device was created by a master's student, whom I helped with developing the PC part of their project.

This project might be useful for people developing a similar application, or for people who are learning Python GUI development using Tk, or learning binary protocols using a serial communication interface.

Use python3 rfid-db-tool.py to run the application

Requirements

• Tk
• PySerial

Tk documentation

• https://python-textbok.readthedocs.io/en/1.0/Introduction_to_GUI_Programming.html
• https://docs.python.org/3/library/tk.html
• https://docs.python.org/3/library/tkinter.html
• https://docs.python.org/3/library/tkinter.ttk.html
• https://www.nmt.edu/tcc/help/pubs/tkinter/tkinter.pdf

PySerial documentation

• https://pyserial.readthedocs.io/en/latest/shortintro.html

Struct documentation

• https://docs.python.org/3/library/struct.html

Project Homepage

https://github.com/0xebef/rfid-db-tool

License and Copyright

License: GPLv3 or later

Copyright (c) 2020, 0xebef