aps512xx.c

/**
  ******************************************************************************
  * @file    aps512xx.c
  * @modify  MCD Application Team
  * @brief   This file provides the APS512XX HSPI drivers.
  ******************************************************************************
  * @attention
  *
  * Copyright (c) 2023 STMicroelectronics.
  * All rights reserved.
  *
  * This software is licensed under terms that can be found in the LICENSE file
  * in the root directory of this software component.
  * If no LICENSE file comes with this software, it is provided AS-IS.
  *
  ******************************************************************************
  */

/* Includes ------------------------------------------------------------------*/
#include "aps512xx.h"

/** @addtogroup BSP
  * @{
  */

/** @addtogroup Components
  * @{
  */

/** @defgroup APS512XX APS512XX
  * @{
  */

/** @defgroup APS512XX_Exported_Functions APS512XX Exported Functions
  * @{
  */

/* Read/Write Array Commands *********************/
/**
  * @brief  Reads an amount of data from the memory.
  * @param  Ctx Component object pointer
  * @param  pData Pointer to data to be read
  * @param  ReadAddr Read start address
  * @param  Size Size of data to read
  * @param  LatencyCode Latency used for the access
  * @param  IOMode I/O Mode used for the access
  * @param  BurstType Type of burst used for the access
  * @retval Memory status
  */
int32_t APS512XX_Read(XSPI_HandleTypeDef *Ctx, uint8_t *pData, uint32_t ReadAddr, uint32_t Size, uint32_t LatencyCode,
                      uint32_t IOMode, uint32_t BurstType)
{
  XSPI_RegularCmdTypeDef sCommand = {0};

  /* Initialize the read command */
  sCommand.OperationType       = HAL_XSPI_OPTYPE_COMMON_CFG;
  sCommand.InstructionMode     = HAL_XSPI_INSTRUCTION_8_LINES;
  sCommand.InstructionWidth    = HAL_XSPI_INSTRUCTION_8_BITS;
  sCommand.InstructionDTRMode  = HAL_XSPI_INSTRUCTION_DTR_DISABLE;
  sCommand.Instruction         = ((BurstType == 0U) ? APS512XX_READ_LINEAR_BURST_CMD : APS512XX_READ_CMD);
  sCommand.AddressMode         = HAL_XSPI_ADDRESS_8_LINES;
  sCommand.AddressWidth        = HAL_XSPI_ADDRESS_32_BITS;
  sCommand.AddressDTRMode      = HAL_XSPI_ADDRESS_DTR_ENABLE;
  sCommand.Address             = ReadAddr;
  sCommand.AlternateBytesMode  = HAL_XSPI_ALT_BYTES_NONE;
  sCommand.DataMode            = ((IOMode == 0U) ? HAL_XSPI_DATA_8_LINES : HAL_XSPI_DATA_16_LINES);
  sCommand.DataDTRMode         = HAL_XSPI_DATA_DTR_ENABLE;
  sCommand.DataLength          = Size;
  sCommand.DummyCycles         = (LatencyCode - 1U);
  sCommand.DQSMode             = HAL_XSPI_DQS_ENABLE;
#if defined (XSPI_CCR_SIOO)
  sCommand.SIOOMode            = HAL_XSPI_SIOO_INST_EVERY_CMD;
#endif
  /* Configure the command */
  if (HAL_XSPI_Command(Ctx, &sCommand, HAL_XSPI_TIMEOUT_DEFAULT_VALUE) != HAL_OK)
  {
    return APS512XX_ERROR;
  }

  /* Reception of the data */
  if (HAL_XSPI_Receive(Ctx, pData, HAL_XSPI_TIMEOUT_DEFAULT_VALUE) != HAL_OK)
  {
    return APS512XX_ERROR;
  }

  return APS512XX_OK;
}

/**
  * @brief  Reads an amount of data in DMA mode from the memory.
  * @param  Ctx Component object pointer
  * @param  pData Pointer to data to be read
  * @param  ReadAddr Read start address
  * @param  Size Size of data to read
  * @param  LatencyCode Latency used for the access
  * @param  IOMode I/O Mode used for the access
  * @param  BurstType Type of burst used for the access
  * @retval Memory status
  */
int32_t APS512XX_Read_DMA(XSPI_HandleTypeDef *Ctx, uint8_t *pData, uint32_t ReadAddr, uint32_t Size,
                          uint32_t LatencyCode, uint32_t IOMode, uint32_t BurstType)
{
  XSPI_RegularCmdTypeDef sCommand = {0};

  /* Initialize the read command */
  sCommand.OperationType       = HAL_XSPI_OPTYPE_COMMON_CFG;
  sCommand.InstructionMode     = HAL_XSPI_INSTRUCTION_8_LINES;
  sCommand.InstructionWidth    = HAL_XSPI_INSTRUCTION_8_BITS;
  sCommand.InstructionDTRMode  = HAL_XSPI_INSTRUCTION_DTR_DISABLE;
  sCommand.Instruction         = ((BurstType == 0U) ? APS512XX_READ_LINEAR_BURST_CMD : APS512XX_READ_CMD);
  sCommand.AddressMode         = HAL_XSPI_ADDRESS_8_LINES;
  sCommand.AddressWidth        = HAL_XSPI_ADDRESS_32_BITS;
  sCommand.AddressDTRMode      = HAL_XSPI_ADDRESS_DTR_ENABLE;
  sCommand.Address             = ReadAddr;
  sCommand.AlternateBytesMode  = HAL_XSPI_ALT_BYTES_NONE;
  sCommand.DataMode            = ((IOMode == 0U) ? HAL_XSPI_DATA_8_LINES : HAL_XSPI_DATA_16_LINES);
  sCommand.DataDTRMode         = HAL_XSPI_DATA_DTR_ENABLE;
  sCommand.DataLength          = Size;
  sCommand.DummyCycles         = (LatencyCode - 1U);
  sCommand.DQSMode             = HAL_XSPI_DQS_ENABLE;
#if defined (XSPI_CCR_SIOO)
  sCommand.SIOOMode            = HAL_XSPI_SIOO_INST_EVERY_CMD;
#endif

  /* Configure the command */
  if (HAL_XSPI_Command(Ctx, &sCommand, HAL_XSPI_TIMEOUT_DEFAULT_VALUE) != HAL_OK)
  {
    return APS512XX_ERROR;
  }

  /* Reception of the data */
  if (HAL_XSPI_Receive_DMA(Ctx, pData) != HAL_OK)
  {
    return APS512XX_ERROR;
  }

  return APS512XX_OK;
}

/**
  * @brief  Writes an amount of data to the memory.
  * @param  Ctx Component object pointer
  * @param  pData Pointer to data to be written
  * @param  WriteAddr Write start address
  * @param  Size Size of data to write
  * @param  LatencyCode Latency used for the access
  * @param  IOMode I/O Mode used for the access
  * @param  BurstType Type of burst used for the access
  * @retval Memory status
  */
int32_t APS512XX_Write(XSPI_HandleTypeDef *Ctx, uint8_t *pData, uint32_t WriteAddr, uint32_t Size, uint32_t LatencyCode,
                       uint32_t IOMode, uint32_t BurstType)
{
  XSPI_RegularCmdTypeDef sCommand = {0};

  /* Initialize the write command */
  sCommand.OperationType       = HAL_XSPI_OPTYPE_COMMON_CFG;
  sCommand.InstructionMode     = HAL_XSPI_INSTRUCTION_8_LINES;
  sCommand.InstructionWidth    = HAL_XSPI_INSTRUCTION_8_BITS;
  sCommand.InstructionDTRMode  = HAL_XSPI_INSTRUCTION_DTR_DISABLE;
  sCommand.Instruction         = ((BurstType == 0U) ? APS512XX_WRITE_LINEAR_BURST_CMD : APS512XX_WRITE_CMD);
  sCommand.AddressMode         = HAL_XSPI_ADDRESS_8_LINES;
  sCommand.AddressWidth        = HAL_XSPI_ADDRESS_32_BITS;
  sCommand.AddressDTRMode      = HAL_XSPI_ADDRESS_DTR_ENABLE;
  sCommand.Address             = WriteAddr;
  sCommand.AlternateBytesMode  = HAL_XSPI_ALT_BYTES_NONE;
  sCommand.DataMode            = ((IOMode == 0U) ? HAL_XSPI_DATA_8_LINES : HAL_XSPI_DATA_16_LINES);
  sCommand.DataDTRMode         = HAL_XSPI_DATA_DTR_ENABLE;
  sCommand.DataLength          = Size;
  sCommand.DummyCycles         = (LatencyCode - 1U);
  sCommand.DQSMode             = HAL_XSPI_DQS_ENABLE;
#if defined (XSPI_CCR_SIOO)
  sCommand.SIOOMode            = HAL_XSPI_SIOO_INST_EVERY_CMD;
#endif

  /* Configure the command */
  if (HAL_XSPI_Command(Ctx, &sCommand, HAL_XSPI_TIMEOUT_DEFAULT_VALUE) != HAL_OK)
  {
    return APS512XX_ERROR;
  }

  /* Transmission of the data */
  if (HAL_XSPI_Transmit(Ctx, pData, HAL_XSPI_TIMEOUT_DEFAULT_VALUE) != HAL_OK)
  {
    return APS512XX_ERROR;
  }

  return APS512XX_OK;
}

/**
  * @brief  Writes an amount of data in DMA mode to the memory.
  * @param  Ctx Component object pointer
  * @param  pData Pointer to data to be written
  * @param  WriteAddr Write start address
  * @param  Size Size of data to write
  * @param  LatencyCode Latency used for the access
  * @param  IOMode I/O Mode used for the access
  * @param  BurstType Type of burst used for the access
  * @retval Memory status
  */
int32_t APS512XX_Write_DMA(XSPI_HandleTypeDef *Ctx, uint8_t *pData, uint32_t WriteAddr, uint32_t Size,
                           uint32_t LatencyCode, uint32_t IOMode, uint32_t BurstType)
{
  XSPI_RegularCmdTypeDef sCommand = {0};

  /* Initialize the write command */
  sCommand.OperationType       = HAL_XSPI_OPTYPE_COMMON_CFG;
  sCommand.InstructionMode     = HAL_XSPI_INSTRUCTION_8_LINES;
  sCommand.InstructionWidth    = HAL_XSPI_INSTRUCTION_8_BITS;
  sCommand.InstructionDTRMode  = HAL_XSPI_INSTRUCTION_DTR_DISABLE;
  sCommand.Instruction         = ((BurstType == 0U) ? APS512XX_WRITE_LINEAR_BURST_CMD : APS512XX_WRITE_CMD);
  sCommand.AddressMode         = HAL_XSPI_ADDRESS_8_LINES;
  sCommand.AddressWidth        = HAL_XSPI_ADDRESS_32_BITS;
  sCommand.AddressDTRMode      = HAL_XSPI_ADDRESS_DTR_ENABLE;
  sCommand.Address             = WriteAddr;
  sCommand.AlternateBytesMode  = HAL_XSPI_ALT_BYTES_NONE;
  sCommand.DataMode            = ((IOMode == 0U) ? HAL_XSPI_DATA_8_LINES : HAL_XSPI_DATA_16_LINES);
  sCommand.DataDTRMode         = HAL_XSPI_DATA_DTR_ENABLE;
  sCommand.DataLength          = Size;
  sCommand.DummyCycles         = (LatencyCode - 1U);
  sCommand.DQSMode             = HAL_XSPI_DQS_ENABLE;
#if defined (XSPI_CCR_SIOO)
  sCommand.SIOOMode            = HAL_XSPI_SIOO_INST_EVERY_CMD;
#endif

  /* Configure the command */
  if (HAL_XSPI_Command(Ctx, &sCommand, HAL_XSPI_TIMEOUT_DEFAULT_VALUE) != HAL_OK)
  {
    return APS512XX_ERROR;
  }

  /* Transmission of the data */
  if (HAL_XSPI_Transmit_DMA(Ctx, pData) != HAL_OK)
  {
    return APS512XX_ERROR;
  }

  return APS512XX_OK;
}

/**
  * @brief  Enable memory mapped mode for the memory.
  * @param  Ctx Component object pointer
  * @param  ReadLatencyCode Latency used for the read access
  * @param  WriteLatencyCode Latency used for the write access
  * @param  IOMode I/O Mode used for the access
  * @param  BurstType Type of burst used for the access
  * @retval Memory status
  */
int32_t APS512XX_EnableMemoryMappedMode(XSPI_HandleTypeDef *Ctx, uint32_t ReadLatencyCode, uint32_t WriteLatencyCode,
                                        uint32_t IOMode, uint32_t BurstType)
{
  XSPI_RegularCmdTypeDef   sCommand = {0};
  XSPI_MemoryMappedTypeDef sMemMappedCfg = {0};

  /* Initialize the write command */
  sCommand.OperationType       = HAL_XSPI_OPTYPE_WRITE_CFG;
  sCommand.InstructionMode     = HAL_XSPI_INSTRUCTION_8_LINES;
  sCommand.InstructionWidth    = HAL_XSPI_INSTRUCTION_8_BITS;
  sCommand.InstructionDTRMode  = HAL_XSPI_INSTRUCTION_DTR_DISABLE;
  sCommand.Instruction         = ((BurstType == 0U) ? APS512XX_WRITE_LINEAR_BURST_CMD : APS512XX_WRITE_CMD);
  sCommand.AddressMode         = HAL_XSPI_ADDRESS_8_LINES;
  sCommand.AddressWidth        = HAL_XSPI_ADDRESS_32_BITS;
  sCommand.AddressDTRMode      = HAL_XSPI_ADDRESS_DTR_ENABLE;
  sCommand.AlternateBytesMode  = HAL_XSPI_ALT_BYTES_NONE;
  sCommand.DataMode            = ((IOMode == 0U) ? HAL_XSPI_DATA_8_LINES : HAL_XSPI_DATA_16_LINES);
  sCommand.DataDTRMode         = HAL_XSPI_DATA_DTR_ENABLE;
  sCommand.DummyCycles         = (WriteLatencyCode - 1U);
  sCommand.DQSMode             = HAL_XSPI_DQS_ENABLE;
#if defined (XSPI_CCR_SIOO)
  sCommand.SIOOMode            = HAL_XSPI_SIOO_INST_EVERY_CMD;
#endif

  if (HAL_XSPI_Command(Ctx, &sCommand, HAL_XSPI_TIMEOUT_DEFAULT_VALUE) != HAL_OK)
  {
    return APS512XX_ERROR;
  }

  /* Initialize the read command */
  sCommand.OperationType = HAL_XSPI_OPTYPE_READ_CFG;
  sCommand.Instruction   = ((BurstType == 0U) ? APS512XX_READ_LINEAR_BURST_CMD : APS512XX_READ_CMD);
  sCommand.DummyCycles   = (ReadLatencyCode - 1U);

  if (HAL_XSPI_Command(Ctx, &sCommand, HAL_XSPI_TIMEOUT_DEFAULT_VALUE) != HAL_OK)
  {
    return APS512XX_ERROR;
  }

  /* Activation of memory-mapped mode */
  sMemMappedCfg.TimeOutActivation = HAL_XSPI_TIMEOUT_COUNTER_DISABLE;

  if (HAL_XSPI_MemoryMapped(Ctx, &sMemMappedCfg) != HAL_OK)
  {
    return APS512XX_ERROR;
  }

  return APS512XX_OK;
}

/* Register/Setting Commands **************************************************/
/**
  * @brief  Read mode register value
  * @param  Ctx Component object pointer
  * @param  Address Register address
  * @param  Value Register value pointer
  * @param  LatencyCode Latency used for the access
  * @retval error status
  */
int32_t APS512XX_ReadReg(XSPI_HandleTypeDef *Ctx, uint32_t Address, uint8_t *Value, uint32_t LatencyCode)
{
  XSPI_RegularCmdTypeDef sCommand = {0};

  /* Initialize the read register command */
  sCommand.OperationType       = HAL_XSPI_OPTYPE_COMMON_CFG;
  sCommand.InstructionMode     = HAL_XSPI_INSTRUCTION_8_LINES;
  sCommand.InstructionWidth    = HAL_XSPI_INSTRUCTION_8_BITS;
  sCommand.InstructionDTRMode  = HAL_XSPI_INSTRUCTION_DTR_DISABLE;
  sCommand.Instruction         = APS512XX_READ_REG_CMD;
  sCommand.AddressMode         = HAL_XSPI_ADDRESS_8_LINES;
  sCommand.AddressWidth        = HAL_XSPI_ADDRESS_32_BITS;
  sCommand.AddressDTRMode      = HAL_XSPI_ADDRESS_DTR_ENABLE;
  sCommand.Address             = Address;
  sCommand.AlternateBytesMode  = HAL_XSPI_ALT_BYTES_NONE;
  sCommand.DataMode            = HAL_XSPI_DATA_8_LINES;
  sCommand.DataDTRMode         = HAL_XSPI_DATA_DTR_ENABLE;
  sCommand.DataLength          = 2;
  sCommand.DummyCycles         = (LatencyCode - 1U);
  sCommand.DQSMode             = HAL_XSPI_DQS_ENABLE;
#if defined (XSPI_CCR_SIOO)
  sCommand.SIOOMode            = HAL_XSPI_SIOO_INST_EVERY_CMD;
#endif

  /* Configure the command */
  if (HAL_XSPI_Command(Ctx, &sCommand, HAL_XSPI_TIMEOUT_DEFAULT_VALUE) != HAL_OK)
  {
    return APS512XX_ERROR;
  }

  /* Reception of the data */
  if (HAL_XSPI_Receive(Ctx, (uint8_t *)Value, HAL_XSPI_TIMEOUT_DEFAULT_VALUE) != HAL_OK)
  {
    return APS512XX_ERROR;
  }

  return APS512XX_OK;
}

/**
  * @brief  Write mode register
  * @param  Ctx Component object pointer
  * @param  Address Register address
  * @param  Value Value to write to register
  * @retval error status
  */
int32_t APS512XX_WriteReg(XSPI_HandleTypeDef *Ctx, uint32_t Address, uint8_t Value)
{
  XSPI_RegularCmdTypeDef sCommand = {0};

  /* Initialize the write register command */
  sCommand.OperationType       = HAL_XSPI_OPTYPE_COMMON_CFG;
  sCommand.InstructionMode     = HAL_XSPI_INSTRUCTION_8_LINES;
  sCommand.InstructionWidth    = HAL_XSPI_INSTRUCTION_8_BITS;
  sCommand.InstructionDTRMode  = HAL_XSPI_INSTRUCTION_DTR_DISABLE;
  sCommand.Instruction         = APS512XX_WRITE_REG_CMD;
  sCommand.AddressMode         = HAL_XSPI_ADDRESS_8_LINES;
  sCommand.AddressWidth        = HAL_XSPI_ADDRESS_32_BITS;
  sCommand.AddressDTRMode      = HAL_XSPI_ADDRESS_DTR_ENABLE;
  sCommand.Address             = Address;
  sCommand.AlternateBytesMode  = HAL_XSPI_ALT_BYTES_NONE;
  sCommand.DataMode            = HAL_XSPI_DATA_8_LINES;
  sCommand.DataDTRMode         = HAL_XSPI_DATA_DTR_ENABLE;
  sCommand.DataLength          = 2;
  sCommand.DummyCycles         = 0;
  sCommand.DQSMode             = HAL_XSPI_DQS_DISABLE;
#if defined (XSPI_CCR_SIOO)
  sCommand.SIOOMode            = HAL_XSPI_SIOO_INST_EVERY_CMD;
#endif

  /* Configure the command */
  if (HAL_XSPI_Command(Ctx, &sCommand, HAL_XSPI_TIMEOUT_DEFAULT_VALUE) != HAL_OK)
  {
    return APS512XX_ERROR;
  }

  /* Transmission of the data */
  if (HAL_XSPI_Transmit(Ctx, (uint8_t *)(&Value), HAL_XSPI_TIMEOUT_DEFAULT_VALUE) != HAL_OK)
  {
    return APS512XX_ERROR;
  }

  return APS512XX_OK;
}

/* ID Commands ****************************************************************/
/**
  * @brief  Read Flash IDs.
  *         Vendor ID, Device ID, Device Density
  * @param  Ctx Component object pointer
  * @param  ID IDs pointer (2 * 8-bits value)
  * @param  LatencyCode Latency used for the access
  * @retval error status
  */
int32_t APS512XX_ReadID(XSPI_HandleTypeDef *Ctx, uint8_t *ID, uint32_t LatencyCode)
{
  /* Read the Mode Register 1 and 2 */
  if (APS512XX_ReadReg(Ctx, APS512XX_MR1_ADDRESS, ID, LatencyCode) != APS512XX_OK)
  {
    return APS512XX_ERROR;
  }

  /* Keep only Vendor ID from Mode Register 1 */
  *ID &= (APS512XX_MR1_VENDOR_ID);

  /* Keep only Device ID and Device Density from Mode Register 2 */
  *(ID + 1) &= (APS512XX_MR2_DEVICE_ID | APS512XX_MR2_DENSITY);

  return APS512XX_OK;
}

/* Power down Commands ********************************************************/
/**
  * @brief  Memory enter deep power-down command
  * @param  Ctx Component object pointer
  * @retval error status
  */
int32_t APS512XX_EnterPowerDown(XSPI_HandleTypeDef *Ctx)
{
  /* Update the deep power down value of the MR6 register */
  if (APS512XX_WriteReg(Ctx, APS512XX_MR6_ADDRESS, APS512XX_MR6_HS_DEEP_POWER_DOWN) != APS512XX_OK)
  {
    return APS512XX_ERROR;
  }

  /* ---         Memory enter deep power down as soon nCS goes high        --- */
  /* --- At least 500us should be respected before leaving deep power down --- */

  return APS512XX_OK;
}

/**
  * @brief  Flash leave deep power-down command
  * @param  Ctx Component object pointer
  * @param  LatencyCode Latency used for the access
  * @retval error status
  */
int32_t APS512XX_LeavePowerDown(XSPI_HandleTypeDef *Ctx)
{
  /* --- A dummy command is sent to the memory, as the nCS should be low for at least 60 ns  --- */
  /* ---                  Memory takes 150us max to leave deep power down                    --- */

  XSPI_RegularCmdTypeDef sCommand = {0};

  /* Initialize the command */
  sCommand.OperationType       = HAL_XSPI_OPTYPE_COMMON_CFG;
  sCommand.InstructionMode     = HAL_XSPI_INSTRUCTION_8_LINES;
  sCommand.InstructionWidth    = HAL_XSPI_INSTRUCTION_8_BITS;
  sCommand.InstructionDTRMode  = HAL_XSPI_INSTRUCTION_DTR_DISABLE;
  sCommand.Instruction         = APS512XX_READ_CMD;
  sCommand.AddressMode         = HAL_XSPI_ADDRESS_8_LINES;
  sCommand.AddressWidth        = HAL_XSPI_ADDRESS_32_BITS;
  sCommand.AddressDTRMode      = HAL_XSPI_ADDRESS_DTR_DISABLE;
  sCommand.Address             = 0;
  sCommand.AlternateBytesMode  = HAL_XSPI_ALT_BYTES_NONE;
  sCommand.DataMode            = HAL_XSPI_DATA_NONE;
  sCommand.DataLength          = 0;
  sCommand.DummyCycles         = 0;
  sCommand.DQSMode             = HAL_XSPI_DQS_DISABLE;
#if defined (XSPI_CCR_SIOO)
  sCommand.SIOOMode            = HAL_XSPI_SIOO_INST_EVERY_CMD;
#endif

  /* Configure the command */
  if (HAL_XSPI_Command(Ctx, &sCommand, HAL_XSPI_TIMEOUT_DEFAULT_VALUE) != HAL_OK)
  {
    return APS512XX_ERROR;
  }

  return APS512XX_OK;
}

/* Reset Command **************************************************************/
/**
  * @brief  Reset the memory
  * @param  Ctx Component object pointer
  * @retval error status
  */
int32_t APS512XX_Reset(XSPI_HandleTypeDef *Ctx)
{
  XSPI_RegularCmdTypeDef sCommand = {0};

  /* Initialize the command */
  sCommand.OperationType      = HAL_XSPI_OPTYPE_COMMON_CFG;
  sCommand.InstructionMode    = HAL_XSPI_INSTRUCTION_8_LINES;
  sCommand.InstructionWidth   = HAL_XSPI_INSTRUCTION_8_BITS;
  sCommand.InstructionDTRMode = HAL_XSPI_INSTRUCTION_DTR_DISABLE;
  sCommand.Instruction        = APS512XX_RESET_CMD;
  sCommand.AddressMode        = HAL_XSPI_ADDRESS_8_LINES;
  sCommand.AddressWidth       = HAL_XSPI_ADDRESS_24_BITS;
  sCommand.AddressDTRMode     = HAL_XSPI_ADDRESS_DTR_DISABLE;
  sCommand.Address            = 0;
  sCommand.AlternateBytesMode = HAL_XSPI_ALT_BYTES_NONE;
  sCommand.DataMode           = HAL_XSPI_DATA_NONE;
  sCommand.DataLength         = 0;
  sCommand.DummyCycles        = 0;
  sCommand.DQSMode            = HAL_XSPI_DQS_DISABLE;
#if defined (XSPI_CCR_SIOO)
  sCommand.SIOOMode            = HAL_XSPI_SIOO_INST_EVERY_CMD;
#endif

  /* Configure the command */
  if (HAL_XSPI_Command(Ctx, &sCommand, HAL_XSPI_TIMEOUT_DEFAULT_VALUE) != HAL_OK)
  {
    return APS512XX_ERROR;
  }

  /* Need to wait tRST */
  HAL_Delay(1);
  return 0/*APS512XX_OK*/;
}

/**
  * @}
  */

/**
  * @}
  */

/**
  * @}
  */

/**
  * @}
  */