Skip to content

Latest commit

 

History

History
124 lines (97 loc) · 7.59 KB

binary_protocol.md

File metadata and controls

124 lines (97 loc) · 7.59 KB
Raw

Snapcast binary protocol

Each message sent with the Snapcast binary protocol is split up into two parts:

  • A base message that provides general information like time sent/received, type of the message, message size, etc
  • A typed message that carries the rest of the information

The protocol is using little endian.

Client joining process

When a client joins a server, the following exchanges happen

  1. Client opens a TCP socket to the server (default port is 1704)
  2. Client sends a Hello message
  3. Server sends a Server Settings message
  4. Server sends a Codec Header message
    1. Until the server sends this, the client shouldn't play any Wire Chunk messages
  5. The server will now send Wire Chunk messages, which can be fed to the audio decoder.
  6. When it comes time for the client to disconnect, the socket can just be closed.
  7. Client periodically sends a Time message, carrying a sent timestamp t_client-sent
    1. Receives a Time response containing the client to server time delta latency_c2s = t_server-recv - t_client-sent + t_network-latency and the server sent timestamp t_server-sent
    2. Calculates latency_s2c = t_client-recv - t_server-sent + t_network_latency
    3. Calcutates the time diff between server and client as (latency_c2s - latency_s2c) / 2, eliminating the network latency (assumed to be symmetric)

Messages

Typed Message ID Name Notes
0 Base The beginning of every message containing data about the typed message
1 Codec Header The codec-specific data to put at the start of a stream to allow decoding
2 Wire Chunk A part of an audio stream
3 Server Settings Settings set from the server like volume, latency, etc
4 Time Used for synchronizing time with the server
5 Hello Sent by the client when connecting with the server
6 Stream Tags Metadata about the stream for use by the client

Base

Field Type Description
type uint16 Should be one of the typed message IDs
id uint16 Used in requests to identify the message (not always used)
refersTo uint16 Used in responses to identify which request message ID this is responding to
sent.sec int32 The second value of the timestamp when this message was sent. Filled in by the sender.
sent.usec int32 The microsecond value of the timestamp when this message was sent. Filled in by the sender.
received.sec int32 The second value of the timestamp when this message was received. Filled in by the receiver.
received.usec int32 The microsecond value of the timestamp when this message was received. Filled in by the receiver.
size uint32 Total number of bytes of the following typed message

Codec Header

Field Type Description
codec_size unint32 Length of the codec string (not including a null character)
codec char[] String describing the codec (not null terminated)
size uint32 Size of the following payload
payload char[] Buffer of data containing the codec header

The payload depends on the used codec:

  • Flac: the FLAC audio file header, as described here. The decoder must be initialized with this header.
  • Ogg: the vorbis stream header, as described here. The decoder must be initialized with this header.
  • PCM: a RIFF WAVE header, as described here. PCM is not encoded, but the decoder must know the samplerate, bit depth and number of channels, which is encoded into the header
  • Opus: a dummy header is sent, containing a 4 byte ID (0x4F505553, ascii for "OPUS"), 4 byte samplerate, 2 byte bit depth, 2 byte channel count (all little endian)

Wire Chunk

Field Type Description
timestamp.sec int32 The second value of the timestamp when this part of the stream was recorded
timestamp.usec int32 The microsecond value of the timestamp when this part of the stream was recorded
size uint32 Size of the following payload
payload char[] Buffer of data containing the encoded PCM data (a decodable chunk per message)

Server Settings

Field Type Description
size uint32 Size of the following JSON string
payload char[] JSON string containing the message (not null terminated)

Sample JSON payload (whitespace added for readability):

{
    "bufferMs": 1000,
    "latency": 0,
    "muted": false,
    "volume": 100
}
  • volume can have a value between 0-100 inclusive

Time

Field Type Description
latency.sec int32 The second value of the latency between the server and the client
latency.usec int32 The microsecond value of the latency between the server and the client

Hello

Field Type Description
size uint32 Size of the following JSON string
payload char[] JSON string containing the message (not null terminated)

Sample JSON payload (whitespace added for readability):

{
    "Arch": "x86_64",
    "ClientName": "Snapclient",
    "HostName": "my_hostname",
    "ID": "00:11:22:33:44:55",
    "Instance": 1,
    "MAC": "00:11:22:33:44:55",
    "OS": "Arch Linux",
    "SnapStreamProtocolVersion": 2,
    "Version": "0.17.1"
}