Welcome to MriscocProUI Discussions!

[classicrocker883]

👋 Welcome!

We’re using Discussions as a place to connect with other members of our community. We hope that you:

• Ask questions you’re wondering about.
• Share ideas.
• Engage with other community members.
• Welcome others and are open-minded. Remember that this is a community we
  build together 💪.

To get started, comment below with an introduction of yourself and tell us about what you do with this community.

[jsanKale]

https://github.com/jsanKale/H32-Marlin Firmware Marlin 2.1.2 for H32 Aquila chips.

[classicrocker883]

this is geest. I'm wondering how you were able to merge the were Marlin with the H32 source code. also I'm having issues compiling with Eclipse on Windows for a make file, tried linking to the PATH. so I have to switch to Linux.

[jsanKale]

It was hard

[jsanKale]

https://github.com/jsanKale/Marlin-2.1.bugfix-on-Professinal-Firmware
My work to run professiol firmware from mriscoc on H32 processor. But proui libraries dont compiles.

[classicrocker883]

i just found this repo for the H32 - https://github.com/shadow578/Marlin-H32

it works in VS code with platformio. unfortunately, the proui libraries do not compile but its possible to at least build firmware in vs code now, (but i dont have my own H32 board so im unable to test it) which is a step closer getting the proui library and features.

i forked my own branch in a new repo of this, hopefully someone can integrate the hc32 libraries into marlin and platformio MakeFile so it builds using platformio instead, which would then be able to implement the Mrriscoc ProUI library 👍 like any other board and chip. the thing is Ender-2 Pro uses the very same chip, and I believe the same LCD screen as the C2 (and CR10 stock display). so now it should be possible to use up to date Marlin can be used for the Aquila C2.

[inspectionsbybob]

I am glad someone is picking up the Aquila firmware.

Forgive me for a question about which version I need to download.

I have a G32 Aquila with a BL-Touch and would LIKE to get MPT and a 5x5 Grid.
(PID tuning is not reliable, and I keep getting a Temperature warning on Alex's software when it oscillates too much)

I downloaded Alex's firmware a year ago, so my color screen is semi-ready, but I can't find the Folder with the updated firmware for the Display.

[classicrocker883]

hi is this question still valid? please look over in the Wiki section How to install, or for display assets go here

as for which version I would go with UBL. but each one may be different, one will have some more features than another. you can read up on it within the releases page, or in one of the Wiki's what's new for this release

[inspectionsbybob]

All done... good to close.