Error : Same T° for every rooms

[antyamok]

Hello,

The installation of Has-cozytouch has been successfully completed. I can see the different rooms of the house where the air conditioning is installed.I can see well for each room, the low T° and high T°.I can see well for each room, the low T° and T°. But the actual and actual T° are identical to the T° of the living room.
For example, the t° should be :
In the living room - 21,9°C (value of the thermostat and app iOS CozyTouch)
In Room 1 - 19.2°C (value of the thermostat and app iOS CozyTouch)
In Room 2 - 19.4°C (value of the thermostat and app iOS CozyTouch)

Whereas in reality, on Has Cozytouch, the T° is :
In the living room - 21.9°C (Home Assistant Value)
In Room 1 - 21.9°C (Home Assistant value)
In Room 2 - 21.9°C (Home Assistant value)

Could you tell me what's wrong and how to fix it?

[antyamok]

@cyr-ius

I think the problem comes from the interpretation of PAC Zone Control 2 by the Home Assistant integration.
I noticed that in home assistant it is the temperature read by the main remote control that is also displayed for the secondary rooms associated with this same remote control.
The cozytouch smartphone application, on the other hand, does a good job of retrieving the temperature information from the secondary remote controls.