% Typeclassopedia % Brent Yorgey

Originally published 12 March 2009 in issue 13 of the Monad.Reader. Ported to the Haskell wiki in November 2011 by Geheimdienst. Converted to Markdown in August 2013 by Erlend Hamberg. Converted to EPUB format with pandoc.

This is not the official version of the Typeclassopedia. The official version is now the Haskell wiki version which supersedes the version published in the Monad.Reader. Please help update and extend it by editing it yourself or by leaving comments, suggestions, and questions on the talk page.

Abstract

The standard Haskell libraries feature a number of type classes with algebraic or category-theoretic underpinnings. Becoming a fluent Haskell hacker requires intimate familiarity with them all, yet acquiring this familiarity often involves combing through a mountain of tutorials, blog posts, mailing list archives, and IRC logs.

The goal of this document is to serve as a starting point for the student of Haskell wishing to gain a firm grasp of its standard type classes. The essentials of each type class are introduced, with examples, commentary, and extensive references for further reading.

Introduction

Have you ever had any of the following thoughts?

What the heck is a monoid, and how is it different from a monad?
I finally figured out how to use Parsec with do-notation, and someone told me I should use something called Applicative instead. Um, what?
Someone in the [#haskell](http://www.haskell.org/haskellwiki/IRC channel) IRC channel used (***), and when I asked Lambdabot to tell me its type, it printed out scary gobbledygook that didn’t even fit on one line! Then someone used fmap fmap fmap and my brain exploded.
When I asked how to do something I thought was really complicated, people started typing things like zip.ap fmap.(id &&& wtf) and the scary thing is that they worked! Anyway, I think those people must actually be robots because there’s no way anyone could come up with that in two seconds off the top of their head.

If you have, look no further! You, too, can write and understand concise, elegant, idiomatic Haskell code with the best of them.

There are two keys to an expert Haskell hacker’s wisdom:

#. Understand the types. #. Gain a deep intuition for each type class and its relationship to other type classes, backed up by familiarity with many examples.

It’s impossible to overstate the importance of the first; the patient student of type signatures will uncover many profound secrets. Conversely, anyone ignorant of the types in their code is doomed to eternal uncertainty. “Hmm, it doesn’t compile ... maybe I’ll stick in an fmap here ... nope, let’s see ... maybe I need another (.) somewhere? ... um ...”

The second key—gaining deep intuition, backed by examples—is also important, but much more difficult to attain. A primary goal of this document is to set you on the road to gaining such intuition. However—

There is no royal road to Haskell. —Euclid^[Well, he probably would have said it if he knew Haskell.]

This document can only be a starting point, since good intuition comes from hard work, not from learning the right metaphor. Anyone who reads and understands all of it will still have an arduous journey ahead—but sometimes a good starting point makes a big difference.

It should be noted that this is not a Haskell tutorial; it is assumed that the reader is already familiar with the basics of Haskell, including the standard Prelude, the type system, data types, and type classes.

The type classes we will be discussing and their interrelationships (source code for this graph can be found here):

Solid arrows point from the general to the specific; that is, if there is an arrow from Foo to Bar it means that every Bar is (or should be, or can be made into) a Foo.
Dotted lines indicate some other sort of relationship.
Monad and ArrowApply are equivalent.
Apply and Comonad are greyed out since they are not actually (yet?) in the standard Haskell libraries ^[Apply can be found in the semigroupoids package, and Comonad in the comonad package.].

One more note before we begin. The original spelling of “type class” is with two words, as evidenced by, for example, the Haskell 2010 Language Report, early papers on type classes like Type classes in Haskell and Type classes: an exploration of the design space, and Hudak et al.’s history of Haskell. However, as often happens with two-word phrases that see a lot of use, it has started to show up as one word (“typeclass”) or, rarely, hyphenated (“type-class”). When wearing my prescriptivist hat, I prefer “type class”, but realize (after changing into my descriptivist hat) that there's probably not much I can do about it.

We now begin with the simplest type class of all: Functor.

Functor

The Functor class (haddock) is the most basic and ubiquitous type class in the Haskell libraries. A simple intuition is that a Functor represents a “container” of some sort, along with the ability to apply a function uniformly to every element in the container. For example, a list is a container of elements, and we can apply a function to every element of a list, using map. As another example, a binary tree is also a container of elements, and it’s not hard to come up with a way to recursively apply a function to every element in a tree.

Another intuition is that a Functor represents some sort of “computational context”. This intuition is generally more useful, but is more difficult to explain, precisely because it is so general. Some examples later should help to clarify the Functor-as-context point of view.

In the end, however, a Functor is simply what it is defined to be; doubtless there are many examples of Functor instances that don’t exactly fit either of the above intuitions. The wise student will focus their attention on definitions and examples, without leaning too heavily on any particular metaphor. Intuition will come, in time, on its own.

Definition

Here is the type class declaration for Functor:

class Functor f where
  fmap :: (a -> b) -> f a -> f b

  (<$) :: a        -> f b -> f a
  (<$) = fmap . const

Functor is exported by the Prelude, so no special imports are needed to use it. Note that the (<$) operator is provided for convenience, with a default implementation in terms of fmap; it is included in the class just to give Functor instances the opportunity to provide a more efficient implementation than the default. To understand Functor, then, we really need to understand fmap.

First, the f a and f b in the type signature for fmap tell us that f isn’t a concrete type like Int; it is a sort of type function which takes another type as a parameter. More precisely, the kind of f must be * -> *. For example, Maybe is such a type with kind * -> *: Maybe is not a concrete type by itself (that is, there are no values of type Maybe), but requires another type as a parameter, like Maybe Integer. So it would not make sense to say instance Functor Integer, but it could make sense to say instance Functor Maybe.

Now look at the type of fmap: it takes any function from a to b, and a value of type f a, and outputs a value of type f b. From the container point of view, the intention is that fmap applies a function to each element of a container, without altering the structure of the container. From the context point of view, the intention is that fmap applies a function to a value without altering its context. Let’s look at a few specific examples.

Finally, we can understand (<$): instead of applying a function to the values a container/context, it simply replaces them with a given value. This is the same as applying a constant function, so (<$) can be implemented in terms of fmap.

Instances

As noted before, the list constructor [] is a functor ^[Recall that [] has two meanings in Haskell: it can either stand for the empty list, or, as here, it can represent the list type constructor (pronounced “list-of”). In other words, the type [a] (list-of-a) can also be written [] a.]; we can use the standard list function map to apply a function to each element of a list ^[You might ask why we need a separate map function. Why not just do away with the current list-only map function, and rename fmap to map instead? Well, that’s a good question. The usual argument is that someone just learning Haskell, when using map incorrectly, would much rather see an error about lists than about Functors.]. The Maybe type constructor is also a functor, representing a container which might hold a single element. The function fmap g has no effect on Nothing (there are no elements to which g can be applied), and simply applies g to the single element inside a Just. Alternatively, under the context interpretation, the list functor represents a context of nondeterministic choice; that is, a list can be thought of as representing a single value which is nondeterministically chosen from among several possibilities (the elements of the list). Likewise, the Maybe functor represents a context with possible failure. These instances are:

instance Functor [] where
  fmap :: (a -> b) -> [a] -> [b]
  fmap _ []     = []
  fmap g (x:xs) = g x : fmap g xs
  -- or we could just say fmap = map

instance Functor Maybe where
  fmap :: (a -> b) -> Maybe a -> Maybe b
  fmap _ Nothing  = Nothing
  fmap g (Just a) = Just (g a)

As an aside, in idiomatic Haskell code you will often see the letter f used to stand for both an arbitrary Functor and an arbitrary function. In this document, f represents only Functors, and g or h always represent functions, but you should be aware of the potential confusion. In practice, what f stands for should always be clear from the context, by noting whether it is part of a type or part of the code.

There are other Functor instances in the standard library as well:

Either e is an instance of Functor; Either e a represents a container which can contain either a value of type a, or a value of type e (often representing some sort of error condition). It is similar to Maybe in that it represents possible failure, but it can carry some extra information about the failure as well.
((,) e) represents a container which holds an “annotation” of type e along with the actual value it holds. It might be clearer to write it as (e,), by analogy with an operator section like (1+), but that syntax is not allowed in types (although it is allowed in expressions with the TupleSections extension enabled). However, you can certainly think of it as (e,).
((->) e) (which can be thought of as (e ->); see above), the type of functions which take a value of type e as a parameter, is a Functor. As a container, (e -> a) represents a (possibly infinite) set of values of a, indexed by values of e. Alternatively, and more usefully, ((->) e) can be thought of as a context in which a value of type e is available to be consulted in a read-only fashion. This is also why ((->) e) is sometimes referred to as the reader monad; more on this later.
IO is a Functor; a value of type IO a represents a computation producing a value of type a which may have I/O effects. If m computes the value x while producing some I/O effects, then fmap g m will compute the value g x while producing the same I/O effects.
Many standard types from the containers library (such as Tree, Map, and Sequence) are instances of Functor. A notable exception is Set, which cannot be made a Functor in Haskell (although it is certainly a mathematical functor) since it requires an Ord constraint on its elements; fmap must be applicable to any types a and b. However, Set (and other similarly restricted data types) can be made an instance of a suitable generalization of Functor, either by making a and b arguments to the Functor type class themselves, or by adding an associated constraint.

Exercises

#. Implement Functor instances for Either e and ((->) e).

#. Implement Functor instances for ((,) e) and for Pair, defined as

```haskell
data Pair a = Pair a a
```

Explain their similarities and differences.

#. Implement a Functor instance for the type ITree, defined as

```haskell
data ITree a = Leaf (Int -> a)
            | Node [ITree a]
```

#. Give an example of a type of kind * -> * which cannot be made an instance of Functor (without using undefined).

#. Is this statement true or false?

The composition of two Functors is also a Functor.

If false, give a counterexample; if true, prove it by exhibiting some appropriate Haskell code.

Laws

As far as the Haskell language itself is concerned, the only requirement to be a Functor is an implementation of fmap with the proper type. Any sensible Functor instance, however, will also satisfy the functor laws, which are part of the definition of a mathematical functor. There are two:

fmap id = id
fmap (g . h) = (fmap g) . (fmap h)

Together, these laws ensure that fmap g does not change the structure of a container, only the elements. Equivalently, and more simply, they ensure that fmap g changes a value without altering its context^[Technically, these laws make f and fmap together an endofunctor on Hask, the category of Haskell types (ignoring $\bot$, which is a party pooper). See Wikibook: Category theory.].

The first law says that mapping the identity function over every item in a container has no effect. The second says that mapping a composition of two functions over every item in a container is the same as first mapping one function, and then mapping the other.

As an example, the following code is a “valid” instance of Functor (it typechecks), but it violates the functor laws. Do you see why?

-- Evil Functor instance
instance Functor [] where
  fmap :: (a -> b) -> [a] -> [b]
  fmap _ [] = []
  fmap g (x:xs) = g x : g x : fmap g xs

Any Haskeller worth their salt would reject this code as a gruesome abomination.

Unlike some other type classes we will encounter, a given type has at most one valid instance of Functor. This can be proven via the free theorem for the type of fmap. In fact, GHC can automatically derive Functor instances for many data types.

A similar argument also shows that any Functor instance satisfying the first law (fmap id = id) will automatically satisfy the second law as well. Practically, this means that only the first law needs to be checked (usually by a very straightforward induction) to ensure that a Functor instance is valid.^[Actually, if seq/undefined are considered, it is possible to have an implementation which satisfies the first law but not the second. The rest of the comments in this section should be considered in a context where seq and undefined are excluded.]

Exercises

#. Although it is not possible for a Functor instance to satisfy the first Functor law but not the second (excluding undefined), the reverse is possible. Give an example of a (bogus) Functor instance which satisfies the second law but not the first. #. Which laws are violated by the evil Functor instance for list shown above: both laws, or the first law alone? Give specific counterexamples.

Intuition

There are two fundamental ways to think about fmap. The first has already been mentioned: it takes two parameters, a function and a container, and applies the function “inside” the container, producing a new container. Alternately, we can think of fmap as applying a function to a value in a context (without altering the context).

Just like all other Haskell functions of “more than one parameter”, however, fmap is actually curried: it does not really take two parameters, but takes a single parameter and returns a function. For emphasis, we can write fmap’s type with extra parentheses: fmap :: (a -> b) -> (f a -> f b). Written in this form, it is apparent that fmap transforms a “normal” function (g :: a -> b) into one which operates over containers/contexts (fmap g :: f a -> f b). This transformation is often referred to as a lift; fmap “lifts” a function from the “normal world” into the “f world”.

Utility functions

There are a few more Functor-related functions which can be imported from the Data.Functor module.

(<$>) is defined as a synonym for fmap. This enables a nice infix style that mirrors the ($) operator for function application. For example, f $ 3 applies the function f to 3, whereas f <$> [1,2,3] applies f to each member of the list.
($>) :: Functor f => f a -> b -> f b is just flip (<$), and can occasionally be useful. To keep them straight, you can remember that (<$) and ($>) point towards the value that will be kept.
void :: Functor f => f a -> f () is a specialization of (<$), that is, void x = () <$ x. This can be used in cases where a computation computes some value but the value should be ignored.

Applicative

A somewhat newer addition to the pantheon of standard Haskell type classes, applicative functors represent an abstraction lying in between Functor and Monad in expressivity, first described by McBride and Paterson. The title of their classic paper, Applicative Programming with Effects, gives a hint at the intended intuition behind the Applicative type class. It encapsulates certain sorts of “effectful” computations in a functionally pure way, and encourages an “applicative” programming style. Exactly what these things mean will be seen later.

Definition

Recall that Functor allows us to lift a “normal” function to a function on computational contexts. But fmap doesn’t allow us to apply a function which is itself in a context to a value in a context. Applicative gives us just such a tool, (<*>) (variously pronounced as "apply", "app", or "splat"). It also provides a method, pure, for embedding values in a default, “effect free” context. Here is the type class declaration for Applicative, as defined in Control.Applicative:

class Functor f => Applicative f where
  pure  :: a -> f a
  infixl 4 <*>, *>, <*
  (<*>) :: f (a -> b) -> f a -> f b

  (*>) :: f a -> f b -> f b
  a1 *> a2 = (id <$ a1) <*> a2

  (<*) :: f a -> f b -> f a
  (<*) = liftA2 const

Note that every Applicative must also be a Functor. In fact, as we will see, fmap can be implemented using the Applicative methods, so every Applicative is a functor whether we like it or not; the Functor constraint forces us to be honest.

(*>) and (<*) are provided for convenience, in case a particular instance of Applicative can provide more efficient implementations, but they are provided with default implementations. For more on these operators, see the section on [Utility functions](http://www.haskell.org/haskellwiki/#Utility functions) below.

As always, it’s crucial to understand the type signatures. First, consider (<*>): the best way of thinking about it comes from noting that the type of (<*>) is similar to the type of ($) ^[Recall that ($) is just function application: f $ x = f x], but with everything enclosed in an f. In other words, (<*>) is just function application within a computational context. The type of (<*>) is also very similar to the type of fmap; the only difference is that the first parameter is f (a -> b), a function in a context, instead of a “normal” function (a -> b).

pure takes a value of any type a, and returns a context/container of type f a. The intention is that pure creates some sort of “default” container or “effect free” context. In fact, the behavior of pure is quite constrained by the laws it should satisfy in conjunction with (<*>). Usually, for a given implementation of (<*>) there is only one possible implementation of pure.

(Note that previous versions of the Typeclassopedia explained pure in terms of a type class Pointed, which can still be found in the pointed package. However, the current consensus is that Pointed is not very useful after all. For a more detailed explanation, see [Why not Pointed?](http://www.haskell.org/haskellwiki/Why not Pointed?))

Laws

Traditionally, there are four laws that Applicative instances should satisfy^[See haddock for Applicative and Applicative programming with effects]. In some sense, they are all concerned with making sure that pure deserves its name:

The identity law:
```
pure id <*> v = v
```
Homomorphism:
```
pure f <*> pure x = pure (f x)
```
Intuitively, applying a non-effectful function to a non-effectful argument in an effectful context is the same as just applying the function to the argument and then injecting the result into the context with pure{.haskell}.
Interchange:
```
u <*> pure y = pure (\f -> f y) <*> u
```
Intuitively, this says that when evaluating the application of an effectful function to a pure argument, the order in which we evaluate the function and its argument doesn't matter.
Composition:
```
u <*> (v <*> w) = pure (.) <*> u <*> v <*> w
```
This one is the trickiest law to gain intuition for. In some sense it is expressing a sort of associativity property of (<*>){.haskell}. The reader may wish to simply convince themselves that this law is type-correct.

Considered as left-to-right rewrite rules, the homomorphism, interchange, and composition laws actually constitute an algorithm for transforming any expression using pure and (<*>) into a canonical form with only a single use of pure at the very beginning and only left-nested occurrences of (<*>). Composition allows reassociating (<*>); interchange allows moving occurrences of pure leftwards; and homomorphism allows collapsing multiple adjacent occurrences of pure into one.

There is also a law specifying how Applicative should relate to Functor:

fmap g x = pure g <*> x

It says that mapping a pure function g over a context x is the same as first injecting g into a context with pure, and then applying it to x with (<*>). In other words, we can decompose fmap into two more atomic operations: injection into a context, and application within a context. Since (<$>) is a synonym for fmap, the above law can also be expressed as:

g <$> x = pure g <*> x.

Exercises

(Tricky) One might imagine a variant of the interchange law that says something about applying a pure function to an effectful argument. Using the above laws, prove that pure f <*> x = pure (flip ($)) <*> x <*> pure f{.haskell}

Instances

Most of the standard types which are instances of Functor are also instances of Applicative.

Maybe can easily be made an instance of Applicative; writing such an instance is left as an exercise for the reader.

The list type constructor [] can actually be made an instance of Applicative in two ways; essentially, it comes down to whether we want to think of lists as ordered collections of elements, or as contexts representing multiple results of a nondeterministic computation (see Wadler’s How to replace failure by a list of successes).

Let’s first consider the collection point of view. Since there can only be one instance of a given type class for any particular type, one or both of the list instances of Applicative need to be defined for a newtype wrapper; as it happens, the nondeterministic computation instance is the default, and the collection instance is defined in terms of a newtype called ZipList. This instance is:

newtype ZipList a = ZipList { getZipList :: [a] }

instance Applicative ZipList where
  pure :: a -> ZipList a
  pure = undefined   -- exercise

  (<*>) :: ZipList (a -> b) -> ZipList a -> ZipList b
  (ZipList gs) <*> (ZipList xs) = ZipList (zipWith ($) gs xs)

To apply a list of functions to a list of inputs with (<*>), we just match up the functions and inputs elementwise, and produce a list of the resulting outputs. In other words, we “zip” the lists together with function application, ($); hence the name ZipList.

The other Applicative instance for lists, based on the nondeterministic computation point of view, is:

instance Applicative [] where
  pure :: a -> [a]
  pure x = [x]

  (<*>) :: [a -> b] -> [a] -> [b]
  gs <*> xs = [ g x | g <- gs, x <- xs ]

Instead of applying functions to inputs pairwise, we apply each function to all the inputs in turn, and collect all the results in a list.

Now we can write nondeterministic computations in a natural style. To add the numbers 3 and 4 deterministically, we can of course write (+) 3 4. But suppose instead of 3 we have a nondeterministic computation that might result in 2, 3, or 4; then we can write

  pure (+) <*> [2,3,4] <*> pure 4

or, more idiomatically,

  (+) <$> [2,3,4] <*> pure 4.

There are several other Applicative instances as well:

IO is an instance of Applicative, and behaves exactly as you would think: to execute m1 <*> m2, first m1 is executed, resulting in a function f, then m2 is executed, resulting in a value x, and finally the value f x is returned as the result of executing m1 <*> m2.
((,) a) is an Applicative, as long as a is an instance of Monoid (section Monoid). The a values are accumulated in parallel with the computation.
The Applicative module defines the Const type constructor; a value of type Const a b simply contains an a. This is an instance of Applicative for any Monoid a; this instance becomes especially useful in conjunction with things like Foldable (section Foldable).
The WrappedMonad and WrappedArrow newtypes make any instances of Monad (section Monad) or Arrow (section Arrow) respectively into instances of Applicative; as we will see when we study those type classes, both are strictly more expressive than Applicative, in the sense that the Applicative methods can be implemented in terms of their methods.

Exercises

#. Implement an instance of Applicative for Maybe. #. Determine the correct definition of pure for the ZipList instance of Applicative—there is only one implementation that satisfies the law relating pure and (<*>).

Intuition

McBride and Paterson’s paper introduces the notation $[[g ; x_1 ; x_2 ; \cdots ; x_n]]$ to denote function application in a computational context. If each $x_i$ has type $f ; t_i$ for some applicative functor $f$, and $g$ has type $t_1 \to t_2 \to \dots \to t_n \to t$, then the entire expression $[[g ; x_1 ; x_2 ; \cdots ; x_n]]$ has type $f ; t$. You can think of this as applying a function to multiple “effectful” arguments. In this sense, the double bracket notation is a generalization of fmap, which allows us to apply a function to a single argument in a context.

Why do we need Applicative to implement this generalization of fmap? Suppose we use fmap to apply g to the first parameter x1. Then we get something of type f (t2 -> ... t), but now we are stuck: we can’t apply this function-in-a-context to the next argument with fmap. However, this is precisely what (<*>) allows us to do.

This suggests the proper translation of the idealized notation $[[g ; x_1 ; x_2 ; \cdots ; x_n]]$ into Haskell, namely

  g <$> x1 <*> x2 <*> ... <*> xn,

recalling that Control.Applicative defines (<$>) as convenient infix shorthand for fmap. This is what is meant by an “applicative style”—effectful computations can still be described in terms of function application; the only difference is that we have to use the special operator (<*>) for application instead of simple juxtaposition.

Note that pure allows embedding “non-effectful” arguments in the middle of an idiomatic application, like

  g <$> x1 <*> pure x2 <*> x3

which has type f d, given

g  :: a -> b -> c -> d
x1 :: f a
x2 :: b
x3 :: f c

The double brackets are commonly known as “idiom brackets”, because they allow writing “idiomatic” function application, that is, function application that looks normal but has some special, non-standard meaning (determined by the particular instance of Applicative being used). Idiom brackets are not supported by GHC, but they are supported by the Strathclyde Haskell Enhancement, a preprocessor which (among many other things) translates idiom brackets into standard uses of (<$>) and (<*>). This can result in much more readable code when making heavy use of Applicative.

In addition, as of GHC 8, the ApplicativeDo extension enables g <$> x1 <*> x2 <*> ... <*> xn to be written in a different style:

do v1 <- x1
   v2 <- x2
   ...
   vn <- xn
   pure (g v1 v2 ... vn)

See the Further Reading section below as well as the discussion of do-notation in the Monad section for more information.

Utility functions

Control.Applicative provides several utility functions that work generically with any Applicative instance.

liftA :: Applicative f => (a -> b) -> f a -> f b. This should be familiar; of course, it is the same as fmap (and hence also the same as (<$>)), but with a more restrictive type. This probably exists to provide a parallel to liftA2 and liftA3, but there is no reason you should ever need to use it.
liftA2 :: Applicative f => (a -> b -> c) -> f a -> f b -> f c lifts a 2-argument function to operate in the context of some Applicative. When liftA2 is fully applied, as in liftA2 f arg1 arg2, it is typically better style to instead use f <$> arg1 <*> arg2. However, liftA2 can be useful in situations where it is partially applied. For example, one could define a Num instance for Maybe Integer by defining (+) = liftA2 (+) and so on.
There is a liftA3 but no liftAn for larger n.
(*>) :: Applicative f => f a -> f b -> f b sequences the effects of two Applicative computations, but discards the result of the first. For example, if m1, m2 :: Maybe Int, then m1 *> m2 is Nothing whenever either m1 or m2 is Nothing; but if not, it will have the same value as m2.
Likewise, (<*) :: Applicative f => f a -> f b -> f a sequences the effects of two computations, but keeps only the result of the first, discarding the result of the second. Just as with (<$) and ($>), to keep (<*) and (*>) straight, remember that they point towards the values that will be kept.
(<**>) :: Applicative f => f a -> f (a -> b) -> f b is similar to (<*>), but where the first computation produces value(s) which are provided as input to the function(s) produced by the second computation. Note this is not the same as flip (<*>), because the effects are performed in the opposite order. This is possible to observe with any Applicative instance with non-commutative effects, such as the instance for lists: (<**>) [1,2] [(+5),(*10)] produces a different result than (flip (<*>)) on the same arguments.
when :: Applicative f => Bool -> f () -> f () conditionally executes a computation, evaluating to its second argument if the test is True, and to pure () if the test is False.
unless :: Applicative f => Bool -> f () -> f () is like when, but with the test negated.
The guard function is for use with instances of Alternative (an extension of Applicative to incorporate the ideas of failure and choice), which is discussed in the section on Alternative and friends.

Exercises

Implement a function sequenceAL :: Applicative f => [f a] -> f [a]{.haskell}. There is a generalized version of this, sequenceA, which works for any Traversable (see the later section on Traversable), but implementing this version specialized to lists is a good exercise.

Alternative formulation

An alternative, equivalent formulation of Applicative is given by

class Functor f => Monoidal f where
  unit :: f ()
  (**) :: f a -> f b -> f (a,b)

Intuitively, this states that a monoidal functor^[In category-theory speak, we say f is a lax monoidal functor because there aren't necessarily functions in the other direction, like f (a, b) -> (f a, f b).] is one which has some sort of "default shape" and which supports some sort of "combining" operation. pure and (<*>) are equivalent in power to unit and (**) (see the Exercises below). More technically, the idea is that f preserves the "monoidal structure" given by the pairing constructor (,) and unit type (). This can be seen even more clearly if we rewrite the types of unit and (**) as

  unit' :: () -> f ()
  (**') :: (f a, f b) -> f (a, b)

Furthermore, to deserve the name "monoidal" (see the section on Monoids), instances of Monoidal ought to satisfy the following laws, which seem much more straightforward than the traditional Applicative laws:

Left identity^[In this and the following laws, $\cong$ refers to isomorphism rather than equality. In particular we consider (x,()) $\cong$ x $\cong$ ((),x) and ((x,y),z) $\cong$ (x,(y,z)).]: unit ** v{.haskell} $\cong$ v
Right identity: u ** unit{.haskell} $\cong$ u
Associativity: u ** (v ** w){.haskell} $\cong$ (u ** v) ** w{.haskell}

These turn out to be equivalent to the usual Applicative laws. In a category theory setting, one would also require a naturality law:

Naturality^[Here g *** h = \(x,y) -> (g x, h y). See Arrows.]: fmap (g *** h) (u ** v) = fmap g u ** fmap h v{.haskell}

but in the context of Haskell, this is a free theorem.

Much of this section was taken from a blog post by Edward Z. Yang; see his actual post for a bit more information.

Exercises

#. Implement pure and (<*>) in terms of unit and (**), and vice versa. #. Are there any Applicative instances for which there are also functions f () -> () and f (a,b) -> (f a, f b), satisfying some "reasonable" laws? #. (Tricky) Prove that given your implementations from the first exercise, the usual Applicative laws and the Monoidal laws stated above are equivalent.

Monad

It’s a safe bet that if you’re reading this, you’ve heard of monads—although it’s quite possible you’ve never heard of Applicative before, or Arrow, or even Monoid. Why are monads such a big deal in Haskell? There are several reasons.

Haskell does, in fact, single out monads for special attention by making them the framework in which to construct I/O operations.
Haskell also singles out monads for special attention by providing a special syntactic sugar for monadic expressions: the do-notation. (As of GHC 8, do-notation can be used with Applicative as well, but the notation is still fundamentally related to monads.)
Monad has been around longer than other abstract models of computation such as Applicative or Arrow.
The more monad tutorials there are, the harder people think monads must be, and the more new monad tutorials are written by people who think they finally “get” monads (the monad tutorial fallacy).

I will let you judge for yourself whether these are good reasons.

In the end, despite all the hoopla, Monad is just another type class. Let’s take a look at its definition.

Definition

As of GHC 8.8, Monad is defined as:

class Applicative m => Monad m where
  return :: a -> m a
  (>>=)  :: m a -> (a -> m b) -> m b
  (>>)   :: m a -> m b -> m b
  m >> n = m >>= \_ -> n

(Prior to GHC 7.10, for historical reasons, Applicative was not a superclass of Monad and prior to GHC 8.8 Monad had an extra fail method.)

The Monad type class is exported by the Prelude, along with a few standard instances. However, many utility functions are found in Control.Monad.

Let’s examine the methods in the Monad class one by one. The type of return should look familiar; it’s the same as pure. Indeed, return is pure, but with an unfortunate name. (Unfortunate, since someone coming from an imperative programming background might think that return is like the C or Java keyword of the same name, when in fact the similarities are minimal.) For historical reasons, we still have both names, but they should always denote the same value (although this cannot be enforced). Likewise, (>>) should be the same as (*>) from Applicative. It is possible that return and (>>) may eventually be removed from the Monad class: see the Monad of No Return proposal.

We can see that (>>) is a specialized version of (>>=), with a default implementation given. It is only included in the type class declaration so that specific instances of Monad can override the default implementation of (>>) with a more efficient one, if desired. Also, note that although _ >> n = n would be a type-correct implementation of (>>), it would not correspond to the intended semantics: the intention is that m >> n ignores the result of m, but not its effects.

The only really interesting thing to look at—and what makes Monad strictly more powerful than Applicative—is (>>=), which is often called bind.

We could spend a while talking about the intuition behind (>>=)—and we will. But first, let’s look at some examples.

Instances

Even if you don’t understand the intuition behind the Monad class, you can still create instances of it by just seeing where the types lead you. You may be surprised to find that this actually gets you a long way towards understanding the intuition; at the very least, it will give you some concrete examples to play with as you read more about the Monad class in general. The first few examples are from the standard Prelude; the remaining examples are from the transformers package.

The simplest possible instance of Monad is Identity, which is described in Dan Piponi’s highly recommended blog post on The Trivial Monad. Despite being “trivial”, it is a great introduction to the Monad type class, and contains some good exercises to get your brain working.
The next simplest instance of Monad is Maybe. We already know how to write return/pure for Maybe. So how do we write (>>=)? Well, let’s think about its type. Specializing for Maybe, we have
```
(>>=) :: Maybe a -> (a -> Maybe b) -> Maybe b.
```
If the first argument to (>>=) is Just x, then we have something of type a (namely, x), to which we can apply the second argument—resulting in a Maybe b, which is exactly what we wanted. What if the first argument to (>>=) is Nothing? In that case, we don’t have anything to which we can apply the a -> Maybe b function, so there’s only one thing we can do: yield Nothing. This instance is:
```
instance Monad Maybe where
  return :: a -> Maybe a
  return = Just

  (>>=) :: Maybe a -> (a -> Maybe b) -> Maybe b
  (Just x) >>= g = g x
  Nothing  >>= _ = Nothing
```
We can already get a bit of intuition as to what is going on here: if we build up a computation by chaining together a bunch of functions with (>>=), as soon as any one of them fails, the entire computation will fail (because Nothing >>= f is Nothing, no matter what f is). The entire computation succeeds only if all the constituent functions individually succeed. So the Maybe monad models computations which may fail.
The Monad instance for the list constructor [] is similar to its Applicative instance; see the exercise below.
Of course, the IO constructor is famously a Monad, but its implementation is somewhat magical, and may in fact differ from compiler to compiler. It is worth emphasizing that the IO monad is the only monad which is magical. It allows us to build up, in an entirely pure way, values representing possibly effectful computations. The special value main, of type IO (), is taken by the runtime and actually executed, producing actual effects. Every other monad is functionally pure, and requires no special compiler support. We often speak of monadic values as “effectful computations”, but this is because some monads allow us to write code as if it has side effects, when in fact the monad is hiding the plumbing which allows these apparent side effects to be implemented in a functionally pure way.
As mentioned earlier, ((->) e) is known as the reader monad, since it describes computations in which a value of type e is available as a read-only environment. The Control.Monad.Reader module provides the Reader e a type, which is just a convenient newtype wrapper around (e -> a), along with an appropriate Monad instance and some Reader-specific utility functions such as ask (retrieve the environment), asks (retrieve a function of the environment), and local (run a subcomputation under a different environment).
The Control.Monad.Writer module provides the Writer monad, which allows information to be collected as a computation progresses. Writer w a is isomorphic to (a,w), where the output value a is carried along with an annotation or “log” of type w, which must be an instance of Monoid (see section Monoid); the special function tell performs logging.
The Control.Monad.State module provides the State s a type, a newtype wrapper around s -> (a,s). Something of type State s a represents a stateful computation which produces an a but can access and modify the state of type s along the way. The module also provides State-specific utility functions such as get (read the current state), gets (read a function of the current state), put (overwrite the state), and modify (apply a function to the state).
The Control.Monad.Cont module provides the Cont monad, which represents computations in continuation-passing style. It can be used to suspend and resume computations, and to implement non-local transfers of control, co-routines, other complex control structures—all in a functionally pure way. Cont has been called the “mother of all monads” because of its universal properties.

Exercises

#. Implement a Monad instance for the list constructor, []. Follow the types!

#. Implement a Monad instance for ((->) e).

#. Implement Functor and Monad instances for Free f, defined as

```haskell
data Free f a = Var a
              | Node (f (Free f a))
```

You may assume that `f` has a `Functor` instance.  This is known as the *free monad* built from the functor `f`.

Intuition

Let’s look more closely at the type of (>>=). The basic intuition is that it combines two computations into one larger computation. The first argument, m a, is the first computation. However, it would be boring if the second argument were just an m b; then there would be no way for the computations to interact with one another (actually, this is exactly the situation with Applicative). So, the second argument to (>>=) has type a -> m b: a function of this type, given a result of the first computation, can produce a second computation to be run. In other words, x >>= k is a computation which runs x, and then uses the result(s) of x to decide what computation to run second, using the output of the second computation as the result of the entire computation.

Intuitively, it is this ability to use the output from previous computations to decide what computations to run next that makes Monad more powerful than Applicative. The structure of an Applicative computation is fixed, whereas the structure of a Monad computation can change based on intermediate results. This also means that parsers built using an Applicative interface can only parse context-free languages; in order to parse context-sensitive languages a Monad interface is needed.^[Actually, because Haskell allows general recursion, one can recursively construct infinite grammars, and hence Applicative (together with Alternative) is enough to parse any context-sensitive language with a finite alphabet. See Parsing context-sensitive languages with Applicative.]

To see the increased power of Monad from a different point of view, let’s see what happens if we try to implement (>>=) in terms of fmap, pure, and (<*>). We are given a value x of type m a, and a function k of type a -> m b, so the only thing we can do is apply k to x. We can’t apply it directly, of course; we have to use fmap to lift it over the m. But what is the type of fmap k? Well, it’s m a -> m (m b). So after we apply it to x, we are left with something of type m (m b)—but now we are stuck; what we really want is an m b, but there’s no way to get there from here. We can add m’s using pure, but we have no way to collapse multiple m’s into one.

This ability to collapse multiple m’s is exactly the ability provided by the function join :: m (m a) -> m a, and it should come as no surprise that an alternative definition of Monad can be given in terms of join:

class Applicative m => Monad'' m where
  join :: m (m a) -> m a

In fact, the canonical definition of monads in category theory is in terms of return, fmap, and join (often called $\eta$, $T$, and $\mu$ in the mathematical literature). Haskell uses an alternative formulation with (>>=) instead of join since it is more convenient to use ^[You might hear some people claim that the definition in terms of return, fmap, and join is the “math definition” and the definition in terms of return and (>>=) is something specific to Haskell. In fact, both definitions were known in the mathematics community long before Haskell picked up monads.]. However, sometimes it can be easier to think about Monad instances in terms of join, since it is a more “atomic” operation. (For example, join for the list monad is just concat.)

Exercises

#. Implement (>>=) in terms of fmap (or liftM) and join. #. Now implement join and fmap (liftM) in terms of (>>=) and return.

Utility functions

The Control.Monad module provides a large number of convenient utility functions, all of which can be implemented in terms of the basic Monad operations (return and (>>=) in particular). We have already seen one of them, namely, join. We also mention some other noteworthy ones here; implementing these utility functions oneself is a good exercise. For a more detailed guide to these functions, with commentary and example code, see Henk-Jan van Tuyl’s tour.

liftM :: Monad m => (a -> b) -> m a -> m b. This should be familiar; of course, it is just fmap. The fact that we have both fmap and liftM is a consequence of the fact that the Monad type class did not require a Functor instance until recently, even though mathematically speaking, every monad is a functor. If you are using GHC 7.10 or newer, you should avoid using liftM and just use fmap instead.
ap :: Monad m => m (a -> b) -> m a -> m b should also be familiar: it is equivalent to (<*>), justifying the claim that the Monad interface is strictly more powerful than Applicative. We can make any Monad into an instance of Applicative by setting pure = return and (<*>) = ap.
sequence :: Monad m => [m a] -> m [a] takes a list of computations and combines them into one computation which collects a list of their results. It is again something of a historical accident that sequence has a Monad constraint, since it can actually be implemented only in terms of Applicative (see the exercise at the end of the Utility Functions section for Applicative). Note that the actual type of sequence is more general, and works over any Traversable rather than just lists; see the section on Traversable.
replicateM :: Monad m => Int -> m a -> m [a] is simply a combination of replicate and sequence.
mapM :: Monad m => (a -> m b) -> [a] -> m [b] maps its first argument over the second, and sequences the results. The forM function is just mapM with its arguments reversed; it is called forM since it models generalized for loops: the list [a] provides the loop indices, and the function a -> m b specifies the “body” of the loop for each index. Again, these functions actually work over any Traversable, not just lists, and they can also be defined in terms of Applicative, not Monad: the analogue of mapM for Applicative is called traverse.
(=<<) :: Monad m => (a -> m b) -> m a -> m b is just (>>=) with its arguments reversed; sometimes this direction is more convenient since it corresponds more closely to function application.
(>=>) :: Monad m => (a -> m b) -> (b -> m c) -> a -> m c is sort of like function composition, but with an extra m on the result type of each function, and the arguments swapped. We’ll have more to say about this operation later. There is also a flipped variant, (<=<).

Many of these functions also have “underscored” variants, such as sequence_ and mapM_; these variants throw away the results of the computations passed to them as arguments, using them only for their side effects.

Other monadic functions which are occasionally useful include filterM, zipWithM, foldM, and forever.

Laws

There are several laws that instances of Monad should satisfy (see also the [Monad laws](http://www.haskell.org/haskellwiki/Monad laws) wiki page). The standard presentation is:

return a >>= k  =  k a
m >>= return    =  m
m >>= (\x -> k x >>= h)  =  (m >>= k) >>= h

The first and second laws express the fact that return behaves nicely: if we inject a value a into a monadic context with return, and then bind to k, it is the same as just applying k to a in the first place; if we bind a computation m to return, nothing changes. The third law essentially says that (>>=) is associative, sort of.

However, the presentation of the above laws, especially the third, is marred by the asymmetry of (>>=). It’s hard to look at the laws and see what they’re really saying. I prefer a much more elegant version of the laws, which is formulated in terms of (>=>) ^[I like to pronounce this operator “fish”.]. Recall that (>=>) “composes” two functions of type a -> m b and b -> m c. You can think of something of type a -> m b (roughly) as a function from a to b which may also have some sort of effect in the context corresponding to m. (>=>) lets us compose these “effectful functions”, and we would like to know what properties (>=>) has. The monad laws reformulated in terms of (>=>) are:

return >=> g  =  g
g >=> return  =  g
(g >=> h) >=> k  =  g >=> (h >=> k)

Ah, much better! The laws simply state that return is the identity of (>=>), and that (>=>) is associative ^[As fans of category theory will note, these laws say precisely that functions of type a -> m b are the arrows of a category with (>=>) as composition! Indeed, this is known as the Kleisli category of the monad m. It will come up again when we discuss Arrows.].

There is also a formulation of the monad laws in terms of fmap, return, and join; for a discussion of this formulation, see the Haskell wikibook page on category theory.

Exercises

Given the definition g >=> h = \x -> g x >>= h, prove the equivalence of the above laws and the usual monad laws.

`do` notation

Haskell’s special do notation supports an “imperative style” of programming by providing syntactic sugar for chains of monadic expressions. The genesis of the notation lies in realizing that something like a >>= \x -> b >> c >>= \y -> d can be more readably written by putting successive computations on separate lines:

a >>= \x ->
b >>
c >>= \y ->
d

This emphasizes that the overall computation consists of four computations a, b, c, and d, and that x is bound to the result of a, and y is bound to the result of c (b, c, and d are allowed to refer to x, and d is allowed to refer to y as well). From here it is not hard to imagine a nicer notation:

do { x <- a
   ;      b
   ; y <- c
   ;      d
   }

(The curly braces and semicolons may optionally be omitted; the Haskell parser uses layout to determine where they should be inserted.) This discussion should make clear that do notation is just syntactic sugar. In fact, do blocks are recursively translated into monad operations (almost) like this:

                  do e → e
       do { e; stmts } → e >> do { stmts }
  do { v <- e; stmts } → e >>= \v -> do { stmts }
do { let decls; stmts} → let decls in do { stmts }

This is not quite the whole story, since v might be a pattern instead of a variable. For example, one can write

do (x:xs) <- foo
   bar x

but what happens if foo is an empty list? There is an instance of MonadFail for [], and the fail function in the MonadFail instance will be used as the value for the do-expression. See also the discussion of MonadPlus and MonadZero in the [section on other monoidal classes](http://www.haskell.org/haskellwiki/#Other monoidal classes: Alternative, MonadPlus, ArrowPlus).

A final note on intuition: do notation plays very strongly to the “computational context” point of view rather than the “container” point of view, since the binding notation x <- m is suggestive of “extracting” a single x from m and doing something with it. But m may represent some sort of a container, such as a list or a tree; the meaning of x <- m is entirely dependent on the implementation of (>>=). For example, if m is a list, x <- m actually means that x will take on each value from the list in turn.

`ApplicativeDo`

Sometimes, the full power of Monad is not needed to desugar do-notation. For example,

do x <- foo1
   y <- foo2
   z <- foo3
   return (g x y z)

would normally be desugared to foo1 >>= \x -> foo2 >>= \y -> foo3 >>= \z -> return (g x y z), but this is equivalent to g <$> foo1 <*> foo2 <*> foo3. With the ApplicativeDo extension enabled (as of GHC 8.0), GHC tries hard to desugar do-blocks using Applicative operations wherever possible. This can sometimes lead to efficiency gains, even for types which also have Monad instances, since in general Applicative computations may be run in parallel, whereas monadic ones may not. For example, consider

g :: Int -> Int -> M Int

-- These could be expensive
bar, baz :: M Int

foo :: M Int
foo = do
  x <- bar
  y <- baz
  g x y

foo definitely depends on the Monad instance of M, since the effects generated by the whole computation may depend (via g) on the Int outputs of bar and baz. Nonetheless, with ApplicativeDo enabled, foo can be desugared as

join (g <$> bar <*> baz)

which may allow bar and baz to be computed in parallel, since they at least do not depend on each other.

The ApplicativeDo extension is described in this wiki page, and in more detail in this Haskell Symposium paper.

`QualifiedDo`

GHC Proposal #216 adds the QualifiedDo extension, which is available in GHC 9.0.1.

When -XQualifiedDo is activated, the syntax [modid.]do becomes available, where modid stands for some module name.

The x <- u statement now uses (modid.>>=). For example

M.do { x <- u; stmts }

is like writing (without the new extension)

u M.>>= \x -> M.do { stmts }

Other monad methods are also covered, see the proposal for more details.

MonadFail

Some monads support a notion of failure, without necessarily supporting the notion of recovery suggested by MonadPlus, and possibly including a primitive error reporting mechanism. This notion is expressed by the relatively unprincipled MonadFail. When the MonadFailDesugaring language extension is enabled, the fail method from MonadFail is used for pattern match failure in do bindings rather than the traditional fail method of the Monad class. This language change is being implemented because there are many monads, such as Reader, State, Writer, RWST, and Cont that simply do not support a legitimate fail method.

See the MonadFail proposal for more information.

Definition

class Monad m => MonadFail m where
  fail :: String -> m a

Law

fail s >>= m = fail s

Monad transformers

One would often like to be able to combine two monads into one: for example, to have stateful, nondeterministic computations (State + []), or computations which may fail and can consult a read-only environment (Maybe + Reader), and so on. Unfortunately, monads do not compose as nicely as applicative functors (yet another reason to use Applicative if you don’t need the full power that Monad provides), but some monads can be combined in certain ways.

Standard monad transformers

The transformers library provides a number of standard monad transformers. Each monad transformer adds a particular capability/feature/effect to any existing monad.

IdentityT is the identity transformer, which maps a monad to (something isomorphic to) itself. This may seem useless at first glance, but it is useful for the same reason that the id function is useful -- it can be passed as an argument to things which are parameterized over an arbitrary monad transformer, when you do not actually want any extra capabilities.
StateT adds a read-write state.
ReaderT adds a read-only environment.
WriterT adds a write-only log.
RWST conveniently combines ReaderT, WriterT, and StateT into one.
MaybeT adds the possibility of failure.
ErrorT adds the possibility of failure with an arbitrary type to represent errors.
ListT adds non-determinism (however, see the discussion of ListT below).
ContT adds continuation handling.

For example, StateT s Maybe is an instance of Monad; computations of type StateT s Maybe a may fail, and have access to a mutable state of type s. Monad transformers can be multiply stacked. One thing to keep in mind while using monad transformers is that the order of composition matters. For example, when a StateT s Maybe a computation fails, the state ceases being updated (indeed, it simply disappears); on the other hand, the state of a MaybeT (State s) a computation may continue to be modified even after the computation has "failed". This may seem backwards, but it is correct. Monad transformers build composite monads “inside out”; MaybeT (State s) a is isomorphic to s -> (Maybe a, s). (Lambdabot has an indispensable @unmtl command which you can use to “unpack” a monad transformer stack in this way.) Intuitively, the monads become "more fundamental" the further inside the stack you get, and the effects of inner monads "have precedence" over the effects of outer ones. Of course, this is just handwaving, and if you are unsure of the proper order for some monads you wish to combine, there is no substitute for using @unmtl or simply trying out the various options.

Definition and laws

All monad transformers should implement the MonadTrans type class, defined in Control.Monad.Trans.Class:

class MonadTrans t where
  lift :: Monad m => m a -> t m a

It allows arbitrary computations in the base monad m to be “lifted” into computations in the transformed monad t m. (Note that type application associates to the left, just like function application, so t m a = (t m) a.)

lift must satisfy the laws

lift . return   =  return
lift (m >>= f)  =  lift m >>= (lift . f)

which intuitively state that lift transforms m a computations into t m a computations in a "sensible" way, which sends the return and (>>=) of m to the return and (>>=) of t m.

Exercises

What is the kind of t in the declaration of MonadTrans?

Transformer type classes and "capability" style

There are also type classes (provided by the mtl package) for the operations of each transformer. For example, the MonadState type class provides the state-specific methods get and put, allowing you to conveniently use these methods not only with State, but with any monad which is an instance of MonadState—including MaybeT (State s), StateT s (ReaderT r IO), and so on. Similar type classes exist for Reader, Writer, Cont, IO, and others ^[The only problem with this scheme is the quadratic number of instances required as the number of standard monad transformers grows—but as the current set of standard monad transformers seems adequate for most common use cases, this may not be that big of a deal.].

These type classes serve two purposes. First, they get rid of (most of) the need for explicitly using lift, giving a type-directed way to automatically determine the right number of calls to lift. Simply writing put will be automatically translated into lift . put, lift . lift . put, or something similar depending on what concrete monad stack you are using.

Second, they give you more flexibility to switch between different concrete monad stacks. For example, if you are writing a state-based algorithm, don't write

foo :: State Int Char
foo = modify (*2) >> return 'x'

but rather

foo :: MonadState Int m => m Char
foo = modify (*2) >> return 'x'

Now, if somewhere down the line you realize you need to introduce the possibility of failure, you might switch from State Int to MaybeT (State Int). The type of the first version of foo would need to be modified to reflect this change, but the second version of foo can still be used as-is.

However, this sort of "capability-based" style (e.g. specifying that foo works for any monad with the "state capability") quickly runs into problems when you try to naively scale it up: for example, what if you need to maintain two independent states? A framework for solving this and related problems is described by Schrijvers and Olivera (Monads, zippers and views: virtualizing the monad stack, ICFP 2011) and is implemented in the Monatron package.

Composing monads

Is the composition of two monads always a monad? As hinted previously, the answer is no.

Since Applicative functors are closed under composition, the problem must lie with join. Indeed, suppose m and n are arbitrary monads; to make a monad out of their composition we would need to be able to implement

join :: m (n (m (n a))) -> m (n a)

but it is not clear how this could be done in general. The join method for m is no help, because the two occurrences of m are not next to each other (and likewise for n).

However, one situation in which it can be done is if n distributes over m, that is, if there is a function

distrib :: n (m a) -> m (n a)

satisfying certain laws. See Jones and Duponcheel (Composing Monads); see also the section on Traversable.

For a much more in-depth discussion and analysis of the failure of monads to be closed under composition, see this question on StackOverflow.

Exercises

Implement join :: M (N (M (N a))) -> M (N a), given distrib :: N (M a) -> M (N a) and assuming M and N are instances of Monad.

MonadFix

Note: MonadFix is included here for completeness (and because it is interesting) but seems not to be used much. Skipping this section on a first read-through is perfectly OK (and perhaps even recommended).

`do rec` notation

The MonadFix class describes monads which support the special fixpoint operation mfix :: (a -> m a) -> m a, which allows the output of monadic computations to be defined via (effectful) recursion. This is supported in GHC by a special “recursive do” notation, enabled by the -XRecursiveDo flag. Within a do block, one may have a nested rec block, like so:

do { x <- foo
   ; rec { y <- baz
         ; z <- bar
         ;      bob
         }
   ; w <- frob
   }

Normally (if we had do in place of rec in the above example), y would be in scope in bar and bob but not in baz, and z would be in scope only in bob. With the rec, however, y and z are both in scope in all three of baz, bar, and bob. A rec block is analogous to a let block such as

let { y = baz
    ; z = bar
    }
in bob

because, in Haskell, every variable bound in a let-block is in scope throughout the entire block. (From this point of view, Haskell's normal do blocks are analogous to Scheme's let* construct.)

What could such a feature be used for? One of the motivating examples given in the original paper describing MonadFix (see below) is encoding circuit descriptions. A line in a do-block such as

  x <- gate y z

describes a gate whose input wires are labeled y and z and whose output wire is labeled x. Many (most?) useful circuits, however, involve some sort of feedback loop, making them impossible to write in a normal do-block (since some wire would have to be mentioned as an input before being listed as an output). Using a rec block solves this problem.

Examples and intuition

Of course, not every monad supports such recursive binding. However, as mentioned above, it suffices to have an implementation of mfix :: (a -> m a) -> m a, satisfying a few laws. Let's try implementing mfix for the Maybe monad. That is, we want to implement a function

maybeFix :: (a -> Maybe a) -> Maybe a

Let's think for a moment about the implementation^[Actually, fix is implemented slightly differently for efficiency reasons; but the given definition is equivalent and simpler for the present purpose.] of the non-monadic fix :: (a -> a) -> a:

fix f = f (fix f)

Inspired by fix, our first attempt at implementing maybeFix might be something like

maybeFix :: (a -> Maybe a) -> Maybe a
maybeFix f = maybeFix f >>= f

This has the right type. However, something seems wrong: there is nothing in particular here about Maybe; maybeFix actually has the more general type Monad m => (a -> m a) -> m a. But didn't we just say that not all monads support mfix?

The answer is that although this implementation of maybeFix has the right type, it does not have the intended semantics. If we think about how (>>=) works for the Maybe monad (by pattern-matching on its first argument to see whether it is Nothing or Just) we can see that this definition of maybeFix is completely useless: it will just recurse infinitely, trying to decide whether it is going to return Nothing or Just, without ever even so much as a glance in the direction of f.

The trick is to simply assume that maybeFix will return Just, and get on with life!

maybeFix :: (a -> Maybe a) -> Maybe a
maybeFix f = ma
  where ma = f (fromJust ma)

This says that the result of maybeFix is ma, and assuming that ma = Just x, it is defined (recursively) to be equal to f x.

Why is this OK? Isn't fromJust almost as bad as unsafePerformIO? Well, usually, yes. This is just about the only situation in which it is justified! The interesting thing to note is that maybeFix will never crash -- although it may, of course, fail to terminate. The only way we could get a crash is if we try to evaluate fromJust ma when we know that ma = Nothing. But how could we know ma = Nothing? Since ma is defined as f (fromJust ma), it must be that this expression has already been evaluated to Nothing -- in which case there is no reason for us to be evaluating fromJust ma in the first place!

To see this from another point of view, we can consider three possibilities. First, if f outputs Nothing without looking at its argument, then maybeFix f clearly returns Nothing. Second, if f always outputs Just x, where x depends on its argument, then the recursion can proceed usefully: fromJust ma will be able to evaluate to x, thus feeding f's output back to it as input. Third, if f tries to use its argument to decide whether to output Just or Nothing, then maybeFix f will not terminate: evaluating f's argument requires evaluating ma to see whether it is Just, which requires evaluating f (fromJust ma), which requires evaluating ma, ... and so on.

There are also instances of MonadFix for lists (which works analogously to the instance for Maybe), for ST, and for IO. The instance for IO is particularly amusing: it creates a new (empty) MVar, immediately reads its contents using unsafeInterleaveIO (which delays the actual reading lazily until the value is needed), uses the contents of the MVar to compute a new value, which it then writes back into the MVar. It almost seems, spookily, that mfix is sending a value back in time to itself through the MVar -- though of course what is really going on is that the reading is delayed just long enough (via unsafeInterleaveIO) to get the process bootstrapped.

Exercises

Implement a MonadFix instance for [].

`mdo` syntax

The example at the start of this section can also be written

mdo { x <- foo
    ; y <- baz
    ; z <- bar
    ;      bob
    ; w <- frob
    }

which will be translated into the original example (assuming that, say, bar and bob refer to y. The difference is that mdo will analyze the code in order to find minimal recursive blocks, which will be placed in rec blocks, whereas rec blocks desugar directly into calls to mfix without any further analysis.

Semigroup

A semigroup is a set $S$ together with a binary operation $\oplus$ which combines elements from $S$. The $\oplus$ operator is required to be associative (that is, $(a \oplus b) \oplus c = a \oplus (b \oplus c)$, for any $a,b,c$ which are elements of $S$).

For example, the natural numbers under addition form a semigroup: the sum of any two natural numbers is a natural number, and $(a+b)+c = a+(b+c)$ for any natural numbers $a$, $b$, and $c$. The integers under multiplication also form a semigroup, as do the integers (or rationals, or reals) under $\max$ or $\min$, Boolean values under conjunction and disjunction, lists under concatenation, functions from a set to itself under composition ... Semigroups show up all over the place, once you know to look for them.

Definition

As of version 4.9 of the base package (which comes with GHC 8.0), semigroups are defined in the Data.Semigroup module. (If you are working with a previous version of base, or want to write a library that supports previous versions of base, you can use the semigroups package.)

The definition of the Semigroup type class (haddock) is as follows:

class Semigroup a where
  (<>) :: a -> a -> a

  sconcat :: NonEmpty a -> a
  sconcat = sconcat (a :| as) = go a as where
    go b (c:cs) = b <> go c cs
    go b []     = b

  stimes :: Integral b => b -> a -> a
  stimes = ...

The really important method is (<>), representing the associative binary operation. The other two methods have default implementations in terms of (<>), and are included in the type class in case some instances can give more efficient implementations than the default.

sconcat reduces a nonempty list using (<>). For most instances, this is the same as foldr1 (<>), but it can be constant-time for idempotent semigroups.

stimes n is equivalent to (but sometimes considerably more efficient than) sconcat . replicate n. Its default definition uses multiplication by doubling (also known as exponentiation by squaring). For many semigroups, this is an important optimization; for some, such as lists, it is terrible and must be overridden.

See the haddock documentation for more information on sconcat and stimes.

Laws

The only law is that (<>) must be associative:

(x <> y) <> z = x <> (y <> z)

Monoid

Many semigroups have a special element $e$ for which the binary operation $\oplus$ is the identity, that is, $e \oplus x = x \oplus e = x$ for every element $x$. Such a semigroup-with-identity-element is called a monoid.

Definition

The definition of the Monoid type class (defined in Data.Monoid; haddock) is:

class Monoid a where
  mempty  :: a
  mappend :: a -> a -> a

  mconcat :: [a] -> a
  mconcat = foldr mappend mempty

The mempty value specifies the identity element of the monoid, and mappend is the binary operation. The default definition for mconcat “reduces” a list of elements by combining them all with mappend, using a right fold. It is only in the Monoid class so that specific instances have the option of providing an alternative, more efficient implementation; usually, you can safely ignore mconcat when creating a Monoid instance, since its default definition will work just fine.

The Monoid methods are rather unfortunately named; they are inspired by the list instance of Monoid, where indeed mempty = [] and mappend = (++), but this is misleading since many monoids have little to do with appending (see these Comments from OCaml Hacker Brian Hurt on the Haskell-cafe mailing list). The situation is made somewhat better by (<>), which is provided as an alias for mappend.

Note that the (<>) alias for mappend conflicts with the Semigroup method of the same name. For this reason, Data.Semigroup re-exports much of Data.Monoid; to use semigroups and monoids together, just import Data.Semigroup, and make sure all your types have both Semigroup and Monoid instances (and that (<>) = mappend).

Laws

Of course, every Monoid instance should actually be a monoid in the mathematical sense, which implies these laws:

mempty `mappend` x = x
x `mappend` mempty = x
(x `mappend` y) `mappend` z = x `mappend` (y `mappend` z)

Instances

There are quite a few interesting Monoid instances defined in Data.Monoid.

[a] is a Monoid, with mempty = [] and mappend = (++). It is not hard to check that (x ++ y) ++ z = x ++ (y ++ z) for any lists x, y, and z, and that the empty list is the identity: [] ++ x = x ++ [] = x.
As noted previously, we can make a monoid out of any numeric type under either addition or multiplication. However, since we can’t have two instances for the same type, Data.Monoid provides two newtype wrappers, Sum and Product, with appropriate Monoid instances.
```
> getSum (mconcat . map Sum $ [1..5])
15
> getProduct (mconcat . map Product $ [1..5])
120
```
This example code is silly, of course; we could just write sum [1..5] and product [1..5]. Nevertheless, these instances are useful in more generalized settings, as we will see in the section on Foldable.
Any and All are newtype wrappers providing Monoid instances for Bool (under disjunction and conjunction, respectively).
There are three instances for Maybe: a basic instance which lifts a Monoid instance for a to an instance for Maybe a, and two newtype wrappers First and Last for which mappend selects the first (respectively last) non-Nothing item.
Endo a is a newtype wrapper for functions a -> a, which form a monoid under composition.
There are several ways to “lift” Monoid instances to instances with additional structure. We have already seen that an instance for a can be lifted to an instance for Maybe a. There are also tuple instances: if a and b are instances of Monoid, then so is (a,b), using the monoid operations for a and b in the obvious pairwise manner. Finally, if a is a Monoid, then so is the function type e -> a for any e; in particular, g `mappend` h is the function which applies both g and h to its argument and then combines the results using the underlying Monoid instance for a. This can be quite useful and elegant (see example).
The type Ordering = LT | EQ | GT is a Monoid, defined in such a way that mconcat (zipWith compare xs ys) computes the lexicographic ordering of xs and ys (if xs and ys have the same length). In particular, mempty = EQ, and mappend evaluates to its leftmost non-EQ argument (or EQ if both arguments are EQ). This can be used together with the function instance of Monoid to do some clever things (example).
There are also Monoid instances for several standard data structures in the containers library (haddock), including Map, Set, and Sequence.

Monoid is also used to enable several other type class instances. As noted previously, we can use Monoid to make ((,) e) an instance of Applicative:

instance Monoid e => Applicative ((,) e) where
  pure :: Monoid e => a -> (e,a)
  pure x = (mempty, x)

  (<*>) :: Monoid e => (e,a -> b) -> (e,a) -> (e,b)
  (u, f) <*> (v, x) = (u `mappend` v, f x)

Monoid can be similarly used to make ((,) e) an instance of Monad as well; this is known as the writer monad. As we’ve already seen, Writer and WriterT are a newtype wrapper and transformer for this monad, respectively.

Monoid also plays a key role in the Foldable type class (see section Foldable).

Failure and choice: Alternative, MonadPlus, ArrowPlus

Several classes (Applicative, Monad, Arrow) have "monoidal" subclasses, intended to model computations that support "failure" and "choice" (in some appropriate sense).

Definition

The Alternative type class (haddock) is for Applicative functors which also have a monoid structure:

class Applicative f => Alternative f where
  empty :: f a
  (<|>) :: f a -> f a -> f a

  some :: f a -> f [a]
  many :: f a -> f [a]

The basic intuition is that empty represents some sort of "failure", and (<|>) represents a choice between alternatives. (However, this intuition does not fully capture the nuance possible; see the section on Laws below.) Of course, (<|>) should be associative and empty should be the identity element for it. Instances of Alternative must implement empty and (<|>); some and many have default implementations but are included in the class since specialized implementations may be more efficient than the default.

The default definitions of some and many are essentially given by

some v = (:) <$> v <*> many v
many v = some v <|> pure []

(though for some reason, in actual fact they are not defined via mutual recursion). The intuition is that both keep running v, collecting its results into a list, until it fails; some v requires v to succeed at least once, whereas many v does not require it to succeed at all. That is, many represents 0 or more repetitions of v, whereas some represents 1 or more repetitions. Note that some and many do not make sense for all instances of Alternative; they are discussed further below.

Likewise, MonadPlus (haddock) is for Monads with a monoid structure:

class Monad m => MonadPlus m where
  mzero :: m a
  mplus :: m a -> m a -> m a

Finally, ArrowZero and ArrowPlus (haddock) represent Arrows (see below) with a monoid structure:

class Arrow arr => ArrowZero arr where
  zeroArrow :: b `arr` c

class ArrowZero arr => ArrowPlus arr where
  (<+>) :: (b `arr` c) -> (b `arr` c) -> (b `arr` c)

Instances

Although this document typically discusses laws before presenting example instances, for Alternative and friends it is worth doing things the other way around, because there is some controversy over the laws and it helps to have some concrete examples in mind when discussing them. We mostly focus on Alternative in this section and the next; now that Applicative is a superclass of Monad, there is little reason to use MonadPlus any longer, and ArrowPlus is rather obscure.

Maybe is an instance of Alternative, where empty is Nothing and the choice operator (<|>) results in its first argument when it is Just, and otherwise results in its second argument. Hence folding over a list of Maybe with (<|>) (which can be done with asum from Data.Foldable) results in the first non-Nothing value in the list (or Nothing if there are none).
[] is an instance, with empty given by the empty list, and (<|>) equal to (++). It is worth pointing out that this is identical to the Monoid instance for [a], whereas the Alternative and Monoid instances for Maybe are different: the Monoid instance for Maybe a requires a Monoid instance for a, and monoidally combines the contained values when presented with two Justs.

Let's think about the behavior of some and many for Maybe and []. For Maybe, we have some Nothing = (:) <$> Nothing <*> many Nothing = Nothing <*> many Nothing = Nothing. Hence we also have many Nothing = some Nothing <|> pure [] = Nothing <|> pure [] = pure [] = Just []. Boring. But what about applying some and many to Just? In fact, some (Just a) and many (Just a) are both bottom! The problem is that since Just a is always "successful", the recursion will never terminate. In theory the result "should be" the infinite list [a,a,a,...] but it cannot even start producing any elements of this list, because there is no way for the (<*>) operator to yield any output until it knows that the result of the call to many will be Just.

You can work out the behavior for [] yourself, but it ends up being quite similar: some and many yield boring results when applied to the empty list, and yield bottom when applied to any non-empty list.

In the end, some and many really only make sense when used with some sort of "stateful" Applicative instance, for which an action v, when run multiple times, can succeed some finite number of times and then fail. For example, parsers have this behavior, and indeed, parsers were the original motivating example for the some and many methods; more on this below.

Since GHC 8.0 (that is, base-4.9), there is an instance of Alternative for IO. empty throws an I/O exception, and (<|>) works by first running its left-hand argument; if the left-hand argument throws an I/O exception, (<|>) catches the exception and then calls its second argument. (Note that other types of exceptions are not caught.) There are other, much better ways to handle I/O errors, but this is a quick and dirty way that may work for simple, one-off programs, such as expressions typed at the GHCi prompt. For example, if you want to read the contents of a file but use some default contents in case the file does not exist, you can just write readFile "somefile.txt" <|> return "default file contents".
Concurrently from the async package has an Alternative instance, for which c1 <|> c2 races c1 and c2 in parallel, and returns the result of whichever finishes first. empty corresponds to the action that runs forever without returning a value.
Practically any parser type (e.g. from parsec, megaparsec, trifecta, ...) has an Alternative instance, where empty is an unconditional parse failure, and (<|>) is left-biased choice. That is, p1 <|> p2 first tries parsing with p1, and if p1 fails then it tries p2 instead.

some and many work particularly well with parser types having an Applicative instance: if p is a parser, then some p parses one or more consecutive occurrences of p (i.e. it will parse as many occurrences of p as possible and then stop), and many p parses zero or more occurrences.

Laws

Of course, instances of Alternative should satisfy the monoid laws

empty <|> x = x
x <|> empty = x
(x <|> y) <|> z = x <|> (y <|> z)

The documentation for some and many states that they should be the "least solution" (i.e. least in the definedness partial order) to their characterizing, mutually recursive default definitions. However, this is controversial, and probably wasn't really thought out very carefully.

Since Alternative is a subclass of Applicative, a natural question is, "how should empty and (<|>) interact with (<*>) and pure?"

Almost everyone agrees on the left zero law (though see the discussion of the right zero law below):

empty <*> f = empty

After this is where it starts to get a bit hairy though. It turns out there are several other laws one might imagine adding, and different instances satisfy different laws.

Right Zero:

Another obvious law would be

f <*> empty = empty

This law is satisfied by most instances; however, it is not satisfied by IO. Once the effects in f have been executed, there is no way to roll them back if we later encounter an exception. Now consider the Backwards applicative transformer from the transformers package. If f is Applicative, then so is Backwards f; it works the same way but performs the actions of the arguments to (<*>) in the reverse order. There is also an instance Alternative f => Alternative (Backwards f). If some f (such as IO) satisfies left zero but not right zero, then Backwards f satisfies right zero but not left zero! So even the left zero law is suspect. The point is that given the existence of Backwards we cannot privilege one direction or the other.

Left Distribution:

(a <|> b) <*> c = (a <*> c) <|> (b <*> c)

This distributivity law is satisfied by [] and Maybe, as you may verify. However, it is not satisfied by IO or most parsers. The reason is that a and b can have effects which influence execution of c, and the left-hand side may end up failing where the right-hand side succeeds.

For example, consider IO, and suppose that a always executes successfully, but c throws an I/O exception after a has run. Concretely, say, a might ensure that a certain file does not exist (deleting it if it does exist or doing nothing if it does not), and then c tries to read that file. In that case (a <|> b) <*> c will first delete the file, ignoring b since a is successful, and then throw an exception when c tries to read the file. On the other hand, b might ensure that the same file in question does exist. In that case (a <*> c) <|> (b <*> c) would succeed: after (a <*> c) throws an exception, it would be caught by (<|>), and then (b <*> c) would be tried.

This law does not hold for parsers for a similar reason: (a <|> b) <*> c has to "commit" to parsing with a or b before running c, whereas (a <*> c) <|> (b <*> c) allows backtracking if a <*> c fails. In the particular case that a succeeds but c fails after a but not after b, these may give different results. For example, suppose a and c both expect to see two asterisks, but b expects to see only one. If there are only three asterisks in the input, b <*> c will be successful whereas a <*> c will not.

Right Distribution:

a <*> (b <|> c) = (a <*> b) <|> (a <*> c)

This law is not satisfied by very many instances, but it's still worth discussing. In particular the law is still satisfied by Maybe. However, it is not satisfied by, for example, lists. The problem is that the results come out in a different order. For example, suppose a = [(+1), (*10)], b = [2], and c = [3]. Then the left-hand side yields [3,4,20,30], whereas the right-hand side is [3,20,4,30].

IO does not satisfy it either, since, for example, a may succeed only the second time it is executed. Parsers, on the other hand, may or may not satisfy this law, depending on how they handle backtracking. Parsers for which (<|>) by itself does full backtracking will satisfy the law; but for many parser combinator libraries this is not the case, for efficiency reasons. For example, parsec fails this law: if a succeeds while consuming some input, and afterwards b fails without consuming any input, then the left-hand side may succeed while the right-hand side fails: after (a <*> b) fails, the right-hand side tries to re-run a without backtracking over the input the original a consumed.

Left Catch:

(pure a) <|> x = pure a

Intuitively, this law states that pure should always represent a "successful" computation. It is satisfied by Maybe, IO, and parsers. However, it is not satisfied by lists, since lists collect all possible results: it corresponds to [a] ++ x == [a] which is obviously false.

This, then, is the situation: we have a lot of instances of Alternative (and MonadPlus), with each instance satisfying some subset of these laws. Moreover, it's not always the same subset, so there is no obvious "default" set of laws to choose. For now at least, we just have to live with the situation. When using a particular instance of Alternative or MonadPlus, it's worth thinking carefully about which laws it satisfies.

Utility functions

There are a few Alternative-specific utility functions worth mentioning:

guard :: Alternative f => Bool -> f (){.haskell} checks the given condition, and evaluates to pure () if the condition holds, and empty if not. This can be used to create a conditional failure point in the middle of a computation, where the computation only proceeds if a certain condition holds.
optional :: Alternative f => f a -> f (Maybe a){.haskell} reifies potential failure into the Maybe type: that is, optional x is a computation which always succeeds, returning Nothing if x fails and Just a if x successfully results in a. It is useful, for example, in the context of parsers, where it corresponds to a production which can occur zero or one times.

Foldable

The Foldable class, defined in the Data.Foldable module (haddock), abstracts over containers which can be “folded” into a summary value. This allows such folding operations to be written in a container-agnostic way.

Definition

The definition of the Foldable type class is:

class Foldable t where
  fold    :: Monoid m => t m -> m
  foldMap :: Monoid m => (a -> m) -> t a -> m
  foldr   :: (a -> b -> b) -> b -> t a -> b
  foldr'  :: (a -> b -> b) -> b -> t a -> b
  foldl   :: (b -> a -> b) -> b -> t a -> b
  foldl'  :: (b -> a -> b) -> b -> t a -> b
  foldr1  :: (a -> a -> a) -> t a -> a
  foldl1  :: (a -> a -> a) -> t a -> a
  toList  :: t a -> [a]
  null    :: t a -> Bool
  length  :: t a -> Int
  elem    :: Eq a => a -> t a -> Bool
  maximum :: Ord a => t a -> a
  minimum :: Ord a => t a -> a
  sum     :: Num a => t a -> a
  product :: Num a => t a -> a

This may look complicated, but in fact, to make a Foldable instance you only need to implement one method: your choice of foldMap or foldr. All the other methods have default implementations in terms of these, and are included in the class in case more efficient implementations can be provided.

Instances and examples

The type of foldMap should make it clear what it is supposed to do: given a way to convert the data in a container into a Monoid (a function a -> m) and a container of a’s (t a), foldMap provides a way to iterate over the entire contents of the container, converting all the a’s to m’s and combining all the m’s with mappend. The following code shows two examples: a simple implementation of foldMap for lists, and a binary tree example provided by the Foldable documentation.

instance Foldable [] where
  foldMap :: Monoid m => (a -> m) -> [a] -> m
  foldMap g = mconcat . map g

data Tree a = Empty | Leaf a | Node (Tree a) a (Tree a)

instance Foldable Tree where
  foldMap :: Monoid m => (a -> m) -> Tree a -> m
  foldMap f Empty        = mempty
  foldMap f (Leaf x)     = f x
  foldMap f (Node l k r) = foldMap f l `mappend` f k `mappend` foldMap f r

The Foldable module also provides instances for Maybe and Array; additionally, many of the data structures found in the standard containers library (for example, Map, Set, Tree, and Sequence) provide their own Foldable instances.

Exercises

#. Implement fold in terms of foldMap. #. What would you need in order to implement foldMap in terms of fold? #. Implement foldMap in terms of foldr. #. Implement foldr in terms of foldMap (hint: use the Endo monoid). #. What is the type of foldMap . foldMap? Or foldMap . foldMap . foldMap, etc.? What do they do?

Derived folds

Given an instance of Foldable, we can write generic, container-agnostic functions such as:

-- Compute the size of any container.
containerSize :: Foldable f => f a -> Int
containerSize = getSum . foldMap (const (Sum 1))

-- Compute a list of elements of a container satisfying a predicate.
filterF :: Foldable f => (a -> Bool) -> f a -> [a]
filterF p = foldMap (\a -> if p a then [a] else [])

-- Get a list of all the Strings in a container which include the
-- letter a.
aStrings :: Foldable f => f String -> [String]
aStrings = filterF (elem 'a')

The Foldable module also provides a large number of predefined folds. These used to be generalized versions of Prelude functions of the same name that only worked on lists; but as of GHC 7.10, the generalized versions themselves are now exported from the Prelude: for example, concat, concatMap, and, or, any, all, sum, product, maximum(By), minimum(By), elem, notElem, and find. For example, before GHC 7.10, length used to have type length :: [a] -> Int; now it has type Foldable t => t a -> Int (and is in fact the same as the containerSize function shown above).

The important function toList is also provided, which turns any Foldable structure into a list of its elements in left-right order; it works by folding with the list monoid.

There are also generic functions that work with Applicative or Monad instances to generate some sort of computation from each element in a container, and then perform all the side effects from those computations, discarding the results: traverse_, sequenceA_, and others. The results must be discarded because the Foldable class is too weak to specify what to do with them: we cannot, in general, make an arbitrary Applicative or Monad instance into a Monoid, but we can make m () into a Monoid for any such m. If we do have an Applicative or Monad with a monoid structure—that is, an Alternative or a MonadPlus—then we can use the asum or msum functions, which can combine the results as well. Consult the Foldable documentation for more details on any of these functions.

Note that the Foldable operations always forget the structure of the container being folded. If we start with a container of type t a for some Foldable t, then t will never appear in the output type of any operations defined in the Foldable module. Many times this is exactly what we want, but sometimes we would like to be able to generically traverse a container while preserving its structure—and this is exactly what the Traversable class provides, which will be discussed in the next section.

Exercises

#. Implement toList :: Foldable f => f a -> [a] in terms of either foldr or foldMap. #. Show how one could implement the generic version of foldr in terms of toList, assuming we had only the list-specific foldr :: (a -> b -> b) -> b -> [a] -> b. #. Pick some of the following functions to implement: concat, concatMap, and, or, any, all, sum, product, maximum(By), minimum(By), elem, notElem, and find. Figure out how they generalize to Foldable and come up with elegant implementations using fold or foldMap along with appropriate Monoid instances. }}

Utility functions

asum :: (Alternative f, Foldable t) => t (f a) -> f a takes a container full of computations and combines them using (<|>).
sequenceA_ :: (Applicative f, Foldable t) => t (f a) -> f () takes a container full of computations and runs them in sequence, discarding the results (that is, they are used only for their effects). Since the results are discarded, the container only needs to be Foldable. (Compare with sequenceA :: (Applicative f, Traversable t) => t (f a) -> f (t a), which requires a stronger Traversable constraint in order to be able to reconstruct a container of results having the same shape as the original container.)
traverse_ :: (Applicative f, Foldable t) => (a -> f b) -> t a -> f () applies the given function to each element in a foldable container and sequences the effects (but discards the results).
for_ is the same as traverse_ but with its arguments flipped. This is the moral equivalent of a "foreach" loop in an imperative language.
For historical reasons, there are also variants of all the above with overly-restrictive Monad(-like) constraints: msum is the same as asum specialized to MonadPlus, and sequence_, mapM_, and forM_ respectively are Monad specializations of sequenceA_, traverse_, and for_.

Exercises

Implement traverse_ in terms of sequenceA_ and vice versa. One of these will need an extra constraint. What is it?

Foldable actually isn't

The generic term "fold" is often used to refer to the more technical concept of catamorphism. Intuitively, given a way to summarize "one level of structure" (where recursive subterms have already been replaced with their summaries), a catamorphism can summarize an entire recursive structure. It is important to realize that Foldable does not correspond to catamorphisms, but to something weaker. In particular, Foldable allows observing only the left-right traversal order of elements within a structure, not the actual structure itself. Put another way, every use of Foldable can be expressed in terms of toList. For example, fold itself is equivalent to mconcat . toList.

This is sufficient for many tasks, but not all. For example, consider trying to compute the depth of a Tree: try as we might, there is no way to implement it using Foldable. However, it can be implemented as a catamorphism.

Traversable

Definition

The Traversable type class, defined in the Data.Traversable module (haddock), is:

class (Functor t, Foldable t) => Traversable t where
  traverse  :: Applicative f => (a -> f b) -> t a -> f (t b)
  sequenceA :: Applicative f => t (f a) -> f (t a)
  mapM      ::       Monad m => (a -> m b) -> t a -> m (t b)
  sequence  ::       Monad m => t (m a) -> m (t a)

As you can see, every Traversable is also a Foldable Functor. To make a Traversable instance, it suffices to implement either traverse or sequenceA; the other methods all have default implementations in terms of these. Note that mapM and sequence only exist for historical reasons; especially now that Applicative is a superclass of Monad, they are nothing more than copies of traverse and sequenceA, respectively, but with more restrictive types.

Intuition

The key method of the Traversable class is traverse, which has the following type:

  traverse :: Applicative f => (a -> f b) -> t a -> f (t b)

This leads us to view Traversable as a generalization of Functor. traverse is an "effectful fmap": it allows us to map over a structure of type t a, applying a function to every element of type a in order to produce a new structure of type t b; but along the way the function may have some effects (captured by the applicative functor f).

Alternatively, we may consider the sequenceA function. Consider its type:

  sequenceA :: Applicative f => t (f a) -> f (t a)

This answers the fundamental question: when can we commute two functors? For example, can we turn a tree of lists into a list of trees?

The ability to compose two monads depends crucially on this ability to commute functors. Intuitively, if we want to build a composed monad M a = m (n a) out of monads m and n, then to be able to implement join :: M (M a) -> M a, that is, join :: m (n (m (n a))) -> m (n a), we have to be able to commute the n past the m to get m (m (n (n a))), and then we can use the joins for m and n to produce something of type m (n a). See Mark Jones’ paper for more details.

It turns out that given a Functor constraint on the type t, traverse and sequenceA are equivalent in power: either can be implemented in terms of the other.

Exercises

#. There are at least two natural ways to turn a tree of lists into a list of trees. What are they, and why? #. Give a natural way to turn a list of trees into a tree of lists. #. What is the type of traverse . traverse? What does it do? #. Implement traverse in terms of sequenceA, and vice versa.

Instances and examples

What’s an example of a Traversable instance? The following code shows an example instance for the same Tree type used as an example in the previous Foldable section. It is instructive to compare this instance with a Functor instance for Tree, which is also shown.

data Tree a = Empty | Leaf a | Node (Tree a) a (Tree a)

instance Traversable Tree where
  traverse :: Applicative f => (a -> f b) -> Tree a -> f (Tree b)
  traverse g Empty        = pure Empty
  traverse g (Leaf x)     = Leaf <$> g x
  traverse g (Node l x r) = Node <$> traverse g l
                                 <*> g x
                                 <*> traverse g r

instance Functor Tree where
  fmap :: (a -> b) -> Tree a -> Tree b
  fmap     g Empty        = Empty
  fmap     g (Leaf x)     = Leaf $ g x
  fmap     g (Node l x r) = Node (fmap g l)
                                 (g x)
                                 (fmap g r)

It should be clear that the Traversable and Functor instances for Tree are structurally identical; the only difference is that the Functor instance involves normal function application, whereas the applications in the Traversable instance take place within an Applicative context, using (<$>) and (<*>). This same pattern will hold for any type.

Any Traversable functor is also Foldable, and a Functor. We can see this not only from the class declaration, but by the fact that we can implement the methods of both classes given only the Traversable methods.

The standard libraries provide a number of Traversable instances, including instances for [], ZipList, Maybe, ((,) e), Sum, Product, Either e, Map, Tree, and Sequence. Notably, Set is not Traversable, although it is Foldable.

Exercises

#. Implement fmap and foldMap using only the Traversable methods. (Note that the Traversable module provides these implementations as fmapDefault and foldMapDefault.) #. Implement Traversable instances for [], Maybe, ((,) e), and Either e. #. Explain why Set is Foldable but not Traversable. #. Show that Traversable functors compose: that is, implement an instance for Traversable (Compose f g) given Traversable instances for f and g.

Laws

Any instance of Traversable must satisfy the following two laws, where Identity is the identity functor (as defined in the Data.Functor.Identity module from the transformers package), and Compose wraps the composition of two functors (as defined in Data.Functor.Compose):

#. traverse Identity = Identity #. traverse (Compose . fmap g . f) = Compose . fmap (traverse g) . traverse f

The first law essentially says that traversals cannot make up arbitrary effects. The second law explains how doing two traversals in sequence can be collapsed to a single traversal.

Additionally, suppose eta is an "Applicative morphism", that is,

  eta :: forall a f g. (Applicative f, Applicative g) => f a -> g a

and eta preserves the Applicative operations: eta (pure x) = pure x and eta (x <*> y) = eta x <*> eta y. Then, by parametricity, any instance of Traversable satisfying the above two laws will also satisfy eta . traverse f = traverse (eta . f).

Bifunctor

Recall that a Functor is a type of kind * -> * where one can "map" a function over the type parameter. (Either e) is a Functor (with fmap :: (a -> b) -> Either e a -> Either e b), as is ((,) e). But there is something oddly asymmetric about these two examples: in principle, there is no reason we can't map over the e instead of the a, for example, like so: lmap :: (e -> e') -> Either e a -> Either e' a. This observation leads directly to the definition of Bifunctor, a class for types of kind * -> * -> * where one can functorially map over both type parameters.

Definition

Here is the type class declaration for Bifunctor, defined in Data.Bifunctor (since base-4.8, which came with GHC 7.10):

class Bifunctor p where
  bimap  :: (a -> b) -> (c -> d) -> p a c -> p b d

  first  :: (a -> b) -> p a c -> p b c
  second :: (b -> c) -> p a b -> p a c

We can infer from the fact that p is applied to two type arguments that its kind must be * -> * -> *. The most fundamental method of the Bifunctor class is bimap, which allows mapping over both type arguments at once. For example,

bimap (+1) length (4, [1,2,3]) = (5,3)

first and second are also provided for mapping over only one type argument at a time. One is required to define either bimap, or both first and second, since default definitions are provided for each in terms of the others, namely:

bimap f g = first f . second g

first  f = bimap f id
second g = bimap id g

Laws

The laws for Bifunctor are entirely analogous to the laws for Functor. First, mapping with the identity function should have no effect:

bimap id id = id
first id    = id
second   id = id

Second, mapping with a composition should be the same as a composition of maps:

bimap (f . g) (h . i) = bimap f h . bimap g i

first  (f . g) = first f  . first g
second (f . g) = second f . second g

These composition laws actually come "for free" (that is, by parametricity) once the identity laws are satisfied. One can also check that the default implementations of first and second will satisfy the requisite laws if and only if bimap does, and vice versa.

There is one additional law that relates bimap, first, and second, namely,

bimap f g = first f . second g

However, this law will hold automatically if one defines only bimap, or only first and second, using the default implementation for the others. So you only need to worry about this law if for some reason (e.g. efficiency) you define all three of the methods by hand.

One might wonder about the symmetric law bimap f g = second g . first f; it turns out that once bimap f g = first f . second g is satisfied, the symmetric version also follows from parametricity.

In summary, there are many laws that can be stated, but most of them follow automatically from default definitions or from parametricity. For example, if you define only bimap, then the only law you actually need to check is bimap id id = id; all the other laws come for free. Likewise, if you define only first and second, you only need to check that first id = id and second id = id.

Instances

(,) and Either are instances in the evident way.
Some larger tuple constructors are also instances; for example, the instance for (,,) maps over the last two components, leaving the first alone. Why anyone would ever want to use this is unclear.
A value of type Const a b (to be discussed more in a later section) consists simply of a value of type a; bimap f g maps f over the a and ignores g.

Arrow

The Arrow class represents another abstraction of computation, in a similar vein to Monad and Applicative. However, unlike Monad and Applicative, whose types only reflect their output, the type of an Arrow computation reflects both its input and output. Arrows generalize functions: if arr is an instance of Arrow, a value of type b `arr` c can be thought of as a computation which takes values of type b as input, and produces values of type c as output. In the (->) instance of Arrow this is just a pure function; in general, however, an arrow may represent some sort of “effectful” computation.

Definition

The definition of the Arrow type class, from Control.Arrow (haddock), is:

class Category arr => Arrow arr where
  arr :: (b -> c) -> (b `arr` c)
  first :: (b `arr` c) -> ((b, d) `arr` (c, d))
  second :: (b `arr` c) -> ((d, b) `arr` (d, c))
  (***) :: (b `arr` c) -> (b' `arr` c') -> ((b, b') `arr` (c, c'))
  (&&&) :: (b `arr` c) -> (b `arr` c') -> (b `arr` (c, c'))

The first thing to note is the Category class constraint, which means that we get identity arrows and arrow composition for free: given two arrows g :: b `arr` c and h :: c `arr` d, we can form their composition g >>> h :: b `arr` d ^[In versions of the base package prior to version 4, there is no Category class, and the Arrow class includes the arrow composition operator (>>>). It also includes pure as a synonym for arr, but this was removed since it conflicts with the pure from Applicative.].

As should be a familiar pattern by now, the only methods which must be defined when writing a new instance of Arrow are arr and first; the other methods have default definitions in terms of these, but are included in the Arrow class so that they can be overridden with more efficient implementations if desired.

Note that first and second conflict with methods of the same name from Data.Bifunctor. If you want to use both for some reason, you will need to import one or both qualified. It used to be common to import Control.Arrow just to get the (->) instance for use in editing pairs using first or second; now it is recommended to import Data.Bifunctor for this purpose instead. (Notice that for the (->) instance of Arrow and the (,) instance of Bifunctor, first and second specialize to the same type.)

Intuition

Let’s look at each of the arrow methods in turn. Ross Paterson’s web page on arrows has nice diagrams which can help build intuition.

The arr function takes any function b -> c and turns it into a generalized arrow b `arr` c. The arr method justifies the claim that arrows generalize functions, since it says that we can treat any function as an arrow. It is intended that the arrow arr g is “pure” in the sense that it only computes g and has no “effects” (whatever that might mean for any particular arrow type).
The first method turns any arrow from b to c into an arrow from (b,d) to (c,d). The idea is that first g uses g to process the first element of a tuple, and lets the second element pass through unchanged. For the function instance of Arrow, of course, first g (x,y) = (g x, y).
The second function is similar to first, but with the elements of the tuples swapped. Indeed, it can be defined in terms of first using an auxiliary function swap, defined by swap (x,y) = (y,x).
The (***) operator is “parallel composition” of arrows: it takes two arrows and makes them into one arrow on tuples, which has the behavior of the first arrow on the first element of a tuple, and the behavior of the second arrow on the second element. The mnemonic is that g *** h is the product (hence *) of g and h. For the function instance of Arrow, we define (g *** h) (x,y) = (g x, h y). The default implementation of (***) is in terms of first, second, and sequential arrow composition (>>>). The reader may also wish to think about how to implement first and second in terms of (***).
The (&&&) operator is “fanout composition” of arrows: it takes two arrows g and h and makes them into a new arrow g &&& h which supplies its input as the input to both g and h, returning their results as a tuple. The mnemonic is that g &&& h performs both g and h (hence &) on its input. For functions, we define (g &&& h) x = (g x, h x).

Instances

The Arrow library itself only provides two Arrow instances, both of which we have already seen: (->), the normal function constructor, and Kleisli m, which makes functions of type a -> m b into Arrows for any Monad m. These instances are:

instance Arrow (->) where
  arr :: (b -> c) -> (b -> c)
  arr g = g

  first :: (b -> c) -> ((b,d) -> (c,d))
  first g (x,y) = (g x, y)

newtype Kleisli m a b = Kleisli { runKleisli :: a -> m b }

instance Monad m => Arrow (Kleisli m) where
  arr :: (b -> c) -> Kleisli m b c
  arr f = Kleisli (return . f)

  first :: Kleisli m b c -> Kleisli m (b,d) (c,d)
  first (Kleisli f) = Kleisli (\ ~(b,d) -> do c <- f b
                                              return (c,d) )

Laws

There are quite a few laws that instances of Arrow should satisfy ^[See John Hughes: Generalising monads to arrows; Sam Lindley, Philip Wadler, Jeremy Yallop: The arrow calculus; Ross Paterson: Programming with Arrows.]:

                       arr id  =  id
                  arr (h . g)  =  arr g >>> arr h
                first (arr g)  =  arr (g *** id)
              first (g >>> h)  =  first g >>> first h
   first g >>> arr (id *** h)  =  arr (id *** h) >>> first g
          first g >>> arr fst  =  arr fst >>> g
first (first g) >>> arr assoc  =  arr assoc >>> first g

assoc ((x,y),z) = (x,(y,z))

Note that this version of the laws is slightly different than the laws given in the first two above references, since several of the laws have now been subsumed by the Category laws (in particular, the requirements that id is the identity arrow and that (>>>) is associative). The laws shown here follow those in Paterson’s Programming with Arrows, which uses the Category class.

The reader is advised not to lose too much sleep over the Arrow laws ^[Unless category-theory-induced insomnolence is your cup of tea.], since it is not essential to understand them in order to program with arrows. There are also laws that ArrowChoice, ArrowApply, and ArrowLoop instances should satisfy; the interested reader should consult Paterson: Programming with Arrows.

ArrowChoice

Computations built using the Arrow class, like those built using the Applicative class, are rather inflexible: the structure of the computation is fixed at the outset, and there is no ability to choose between alternate execution paths based on intermediate results. The ArrowChoice class provides exactly such an ability:

class Arrow arr => ArrowChoice arr where
  left  :: (b `arr` c) -> (Either b d `arr` Either c d)
  right :: (b `arr` c) -> (Either d b `arr` Either d c)
  (+++) :: (b `arr` c) -> (b' `arr` c') -> (Either b b' `arr` Either c c')
  (|||) :: (b `arr` d) -> (c `arr` d) -> (Either b c `arr` d)

A comparison of ArrowChoice to Arrow will reveal a striking parallel between left, right, (+++), (|||) and first, second, (***), (&&&), respectively. Indeed, they are dual: first, second, (***), and (&&&) all operate on product types (tuples), and left, right, (+++), and (|||) are the corresponding operations on sum types. In general, these operations create arrows whose inputs are tagged with Left or Right, and can choose how to act based on these tags.

If g is an arrow from b to c, then left g is an arrow from Either b d to Either c d. On inputs tagged with Left, the left g arrow has the behavior of g; on inputs tagged with Right, it behaves as the identity.
The right function, of course, is the mirror image of left. The arrow right g has the behavior of g on inputs tagged with Right.
The (+++) operator performs “multiplexing”: g +++ h behaves as g on inputs tagged with Left, and as h on inputs tagged with Right. The tags are preserved. The (+++) operator is the sum (hence +) of two arrows, just as (***) is the product.
The (|||) operator is “merge” or “fanin”: the arrow g ||| h behaves as g on inputs tagged with Left, and h on inputs tagged with Right, but the tags are discarded (hence, g and h must have the same output type). The mnemonic is that g ||| h performs either g or h on its input.

The ArrowChoice class allows computations to choose among a finite number of execution paths, based on intermediate results. The possible execution paths must be known in advance, and explicitly assembled with (+++) or (|||). However, sometimes more flexibility is needed: we would like to be able to compute an arrow from intermediate results, and use this computed arrow to continue the computation. This is the power given to us by ArrowApply.

ArrowApply

The ArrowApply type class is:

class Arrow arr => ArrowApply arr where
  app :: (b `arr` c, b) `arr` c

If we have computed an arrow as the output of some previous computation, then app allows us to apply that arrow to an input, producing its output as the output of app. As an exercise, the reader may wish to use app to implement an alternative “curried” version, app2 :: b arr((barrc)arr c).

This notion of being able to compute a new computation may sound familiar: this is exactly what the monadic bind operator (>>=) does. It should not particularly come as a surprise that ArrowApply and Monad are exactly equivalent in expressive power. In particular, Kleisli m can be made an instance of ArrowApply, and any instance of ArrowApply can be made a Monad (via the newtype wrapper ArrowMonad). As an exercise, the reader may wish to try implementing these instances:

class Arrow arr => ArrowApply arr where
  app :: (b `arr` c, b) `arr` c

instance Monad m => ArrowApply (Kleisli m) where
  app :: Kleisli m (Kleisli m b c, b) c
  app =    -- exercise

newtype ArrowApply a => ArrowMonad a b = ArrowMonad (a () b)

instance ArrowApply a => Monad (ArrowMonad a) where
  return :: b -> ArrowMonad a b
  return               =    -- exercise

  (>>=) :: ArrowMonad a a -> (a -> ArrowMonad a b) -> ArrowMonad a b
  (ArrowMonad a) >>= k =    -- exercise

ArrowLoop

The ArrowLoop type class is:

class Arrow a => ArrowLoop a where
  loop :: a (b, d) (c, d) -> a b c

trace :: ((b,d) -> (c,d)) -> b -> c
trace f b = let (c,d) = f (b,d) in c

It describes arrows that can use recursion to compute results, and is used to desugar the rec construct in arrow notation (described below).

Taken by itself, the type of the loop method does not seem to tell us much. Its intention, however, is a generalization of the trace function which is also shown. The d component of the first arrow’s output is fed back in as its own input. In other words, the arrow loop g is obtained by recursively “fixing” the second component of the input to g.

It can be a bit difficult to grok what the trace function is doing. How can d appear on the left and right sides of the let? Well, this is Haskell’s laziness at work. There is not space here for a full explanation; the interested reader is encouraged to study the standard fix function, and to read Paterson’s arrow tutorial.

Arrow notation

Programming directly with the arrow combinators can be painful, especially when writing complex computations which need to retain simultaneous reference to a number of intermediate results. With nothing but the arrow combinators, such intermediate results must be kept in nested tuples, and it is up to the programmer to remember which intermediate results are in which components, and to swap, reassociate, and generally mangle tuples as necessary. This problem is solved by the special arrow notation supported by GHC, similar to do notation for monads, that allows names to be assigned to intermediate results while building up arrow computations. An example arrow implemented using arrow notation, taken from Paterson, is:

class ArrowLoop arr => ArrowCircuit arr where
  delay :: b -> (b `arr` b)

counter :: ArrowCircuit arr => Bool `arr` Int
counter = proc reset -> do
            rec output <- idA     -< if reset then 0 else next
                next   <- delay 0 -< output + 1
            idA -< output

This arrow is intended to represent a recursively defined counter circuit with a reset line.

There is not space here for a full explanation of arrow notation; the interested reader should consult Paterson’s paper introducing the notation, or his later tutorial which presents a simplified version.

Comonad

The final type class we will examine is Comonad. The Comonad class is the categorical dual of Monad; that is, Comonad is like Monad but with all the function arrows flipped. It is not actually in the standard Haskell libraries, but it has seen some interesting uses recently, so we include it here for completeness.

Definition

The Comonad type class, defined in the Control.Comonad module of the comonad library, is:

class Functor w => Comonad w where
  extract :: w a -> a

  duplicate :: w a -> w (w a)
  duplicate = extend id

  extend :: (w a -> b) -> w a -> w b
  extend f = fmap f . duplicate

As you can see, extract is the dual of return, duplicate is the dual of join, and extend is the dual of (=<<). The definition of Comonad is a bit redundant, giving the programmer the choice on whether extend or duplicate are implemented; the other operation then has a default implementation.

A prototypical example of a Comonad instance is:

-- Infinite lazy streams
data Stream a = Cons a (Stream a)

-- 'duplicate' is like the list function 'tails'
-- 'extend' computes a new Stream from an old, where the element
--   at position n is computed as a function of everything from
--   position n onwards in the old Stream
instance Comonad Stream where
  extract :: Stream a -> a
  extract (Cons x _) = x

  duplicate :: Stream a -> Stream (Stream a)
  duplicate s@(Cons x xs) = Cons s (duplicate xs)

  extend :: (Stream a -> b) -> Stream a -> Stream b
  extend g s@(Cons x xs)  = Cons (g s) (extend g xs)
                       -- = fmap g (duplicate s)

Acknowledgements

A special thanks to all of those who taught me about standard Haskell type classes and helped me develop good intuition for them, particularly Jules Bean (quicksilver), Derek Elkins (ddarius), Conal Elliott (conal), Cale Gibbard (Cale), David House, Dan Piponi (sigfpe), and Kevin Reid (kpreid).

I also thank the many people who provided a mountain of helpful feedback and suggestions on a first draft of the Typeclassopedia: David Amos, Kevin Ballard, Reid Barton, Doug Beardsley, Joachim Breitner, Andrew Cave, David Christiansen, Gregory Collins, Mark Jason Dominus, Conal Elliott, Yitz Gale, George Giorgidze, Steven Grady, Travis Hartwell, Steve Hicks, Philip Hölzenspies, Edward Kmett, Eric Kow, Serge Le Huitouze, Felipe Lessa, Stefan Ljungstrand, Eric Macaulay, Rob MacAulay, Simon Meier, Eric Mertens, Tim Newsham, Russell O’Connor, Conrad Parker, Walt Rorie-Baety, Colin Ross, Tom Schrijvers, Aditya Siram, C. Smith, Martijn van Steenbergen, Joe Thornber, Jared Updike, Rob Vollmert, Andrew Wagner, Louis Wasserman, and Ashley Yakeley, as well as a few only known to me by their IRC nicks: b_jonas, maltem, tehgeekmeister, and ziman. I have undoubtedly omitted a few inadvertently, which in no way diminishes my gratitude.

Finally, I would like to thank Wouter Swierstra for his fantastic work editing the Monad.Reader, and my wife Joyia for her patience during the process of writing the Typeclassopedia.

About the author

Brent Yorgey (blog) is (as of August 2017) an assistant professor in the department of mathematics and computer science at Hendrix College in Conway, Arkansas, USA. He enjoys teaching, creating EDSLs, playing Bach fugues, musing upon category theory, and cooking tasty lambda-treats for the denizens of #haskell.

Colophon

The Typeclassopedia was written by Brent Yorgey and initially published in March 2009. It was converted to wiki syntax by Geheimdienst in November 2011, after asking Brent’s permission. The Markdown conversion was done by Erlend Hamberg and the EPUB file is generated by the excellent pandoc tool written by John MacFarlane.

Files

typeclassopedia.md

Latest commit

History

typeclassopedia.md

File metadata and controls

Abstract

Introduction

Functor

Definition

Instances

Exercises

Laws

Exercises

Intuition

Utility functions

Further reading

Applicative

Definition

Laws

Exercises

Instances

Exercises

Intuition

Utility functions

Exercises

Alternative formulation

Exercises

Further reading

Monad

Definition

Instances

Exercises

Intuition

Exercises

Utility functions

Laws

Exercises

do notation

ApplicativeDo

QualifiedDo

Further reading

MonadFail

Definition

Law

Monad transformers

Standard monad transformers

Definition and laws

Exercises

Transformer type classes and "capability" style

Composing monads

Exercises

Further reading

MonadFix

do rec notation

Examples and intuition

Exercises

mdo syntax

Further reading

Semigroup

Definition

Laws

Monoid

Definition

Laws

Instances

Further reading

Failure and choice: Alternative, MonadPlus, ArrowPlus

Definition

Instances

Laws

Utility functions

Further reading

Foldable

Definition

Instances and examples

Exercises

Derived folds

Exercises

Utility functions

`do` notation

`ApplicativeDo`

`QualifiedDo`

`do rec` notation

`mdo` syntax