Readme-swarm.md

###############################################

#Please run this below

#$ source Readme-k8s.md ###############################################

source .env source .c.env source .hlc.env source .swarm.env

echo echo -e $COLOR "Kindly make note before starting DockerSwarm deployments "$NONE echo -e $BLCOLOR" Ensure you installed prereqs on 2nd host, if not installed, you have run on single node with SAME Host name & SAME IP Address"$NONE echo -e $YCOLOR" As prerequestie for 2 Node DockerSwarm Setup, you need to install prereq and download the binaries and images on remote node(host2) "$NONE

echo ""

echo " Execute with below commands in sequence" echo -e $GRCOLOR "ex : \n dswarmstart \n dswarmInit \n dswarmDeploy \n dswarmCHLcreate \n dswarmPeerConnect \n dswarmexplorer \n dswarmStop " $NONE

export CLI_NAME="$(docker ps --format='{{.Names}}' | grep _cli)"

function dswarmstart () { export cat .hlc.env | grep ORD_TYPE if [ "$ORD_TYPE" == "SOLO" ]; then echo "running ./scripts/1a_firsttimeonly.sh" rm -rf crypto-config mkdir -p channel-artifacts ./scripts/1a_firsttimeonly.sh dswarmreplKeys echo -e $GRCOLOR" figlet Starting Fabric - SWARM"$NONE echo -e $GRCOLO" Starting with SOLO Orderer "$NONE fi

}

function dswarmreplKeys() { ######### Replacing KEY values for Docker swarm configs

echo -e $PCOLOR"#### Updating SK Keys"$NONE
sleep 1
set +x
ORG1KEY="$(ls crypto-config/peerOrganizations/$ORG_1.$DOMAIN_NAME/ca/ | grep 'sk$')"
sed -i -e "s/{ORG1-CA-KEY}/$ORG1KEY/g" ./swarm/org1/docker-compose-swarm-services.yaml
ORG1TLSKEY="$(ls crypto-config/peerOrganizations/$ORG_1.$DOMAIN_NAME/tlsca/ | grep 'sk$')"
sed -i -e "s/{ORG1-TLSCA-KEY}/$ORG1TLSKEY/g" ./swarm/org1/docker-compose-swarm-services.yaml


ORG2KEY="$(ls crypto-config/peerOrganizations/$ORG_2.$DOMAIN_NAME/ca/ | grep 'sk$')"
sed -i -e "s/{ORG2-CA-KEY}/$ORG2KEY/g" ./swarm/org2/docker-compose-swarm-org2-services.yaml
ORG2TLSKEY="$(ls crypto-config/peerOrganizations/$ORG_2.$DOMAIN_NAME/tlsca/ | grep 'sk$')"
sed -i -e "s/{ORG2-TLSCA-KEY}/$ORG2TLSKEY/g" ./swarm/org2/docker-compose-swarm-org2-services.yaml

}

function dswarmscp() { echo -e $PCOLOR"#### Transfering the Crypro artifacts to $ORG2_HOSTNAME for Sync swarm Network " echo -e $PCOLOR"#### Considering the below" echo -e $PCOLOR"#### 1, The Pre requestie installed i.e Docker, Fabric binary, Images, go, etc." echo -e $PCOLOR"#### 2, Following the same folder structure in remote host. i.e. ~/fabric-samples/"$NONE

echo

source .swarm.env 
        echo -e $LBCOLOR " >>> Copying the artifacts/cryptogen  files to $ORG2_HOSTNAME " $NONE
        FOLD=`echo -e $BCOLOR"Enter the full path on the remote host  to copying the files ex:/home/user/fabric-samples/HL-Automation :"$NONE`
        read -p "$FOLD" REMOT_HOME_DIR_PATH
        echo "REMOT_HOME_DIR_PATH=$REMOT_HOME_DIR_PATH" >> .swarm.env

        if [ $ORG1_HOSTNAME != $ORG2_HOSTNAME ]; then
                echo "Connecting with Hostname..."
                ssh $user1@$ORG2_HOSTNAME mkdir -p $REMOT_HOME_DIR_PATH
                echo "Directory path created, enter password again for copying files.."
                scp -r channel-artifacts crypto-config $user1@$ORG2_HOSTNAME:$REMOT_HOME_DIR_PATH
        else
            echo "..skipping Remote filecopy on second node, Since the both hosts names are same"
            echo "Do Not execute IPAddress step" > /tmp/dnd
        fi

        Connecting by IP address
        cat /tmp/dnd | grep 'Do Not execute IPAddress step' &> /dev/null
        if [ $? == 0 ]; then
           echo "..skipping Remote filecopy on second nodem, Since the both host IPs are same,"
        else
            echo "Connecting with ipaddress..."
            ssh $user1@$ORG2_IPADDRESS mkdir -p $REMOT_HOME_DIR_PATH
            echo "Directory path created, enter password again for copying files.."
            scp -r channel-artifacts crypto-config $user1@$ORG2_IPADDRESS:$REMOT_HOME_DIR_PATH     
        fi
        
        #if [ $ORG1_IPADDRESS != $ORG2_IPADDRESS ]; then
        #            ssh $user1@$ORG2_IPADDRESS mkdir -p $REMOT_HOME_DIR_PATH
        #            echo "Directory path created, enter password again for copying files.."
        #            scp -r channel-artifacts crypto-config $user1@$ORG2_IPADDRESS:$REMOT_HOME_DIR_PATH
        #else
        #    echo "..skipping Swam Join on second node, Since the both host IPs are same,"
        #fi

        sleep 1        

}

function dswarmInit() { echo -e $PCOLOR"#### Initialising the Docker Swarm on host 1"$NONE echo sleep 1 echo -e $YCOLOR"Cleaning if any previous installs of docker swarm network from current node..."$NONE docker swarm leave -f 2> /dev/null sleep 1 export DNETi=ip route | grep default | sed -e "s/^.*dev.//" -e "s/.proto.*//" export NETi=echo -e $BCOLOR"Provide a Network Interface name to initiate Swarm Network :"$NONE echo "Interface name is required if the system has multiple Network interfaces, else will take default interface" read -p "$NETi" NETi1 if [ -z $NETi1 ];then echo "Taking default"; NETi1="$DNETi"; else NETi1="$NETi1"; fi; echo $NETi1 echo "netIFone=$NETi1" >> .swarm.env

docker node ls 2> /dev/null #| grep "Leader"
if [ $? -ne 0 ]; then
    docker swarm init --advertise-addr $NETi1 > /dev/null 2>&1
    echo -e $PCOLOR"Docker Swarm Network Initialised"$NONE
    docker node ls 
fi

# Get token to join
SWARM_TOKEN=$(docker swarm join-token -q worker)

# Get Swarm master IP 
SWARM_MASTER=$(docker info --format "{{.Swarm.NodeAddr}}")
echo "Swarm master IP: ${SWARM_MASTER}"
echo
# cleaning on 2nd host
echo -e $LBCOLOR"#### Joining the Host: $ORG2_HOSTNAME to Docker swarm Network "$NONE
echo
echo -e $PCOLOR">>>>> provide the username for Remote host2, ensure the user has admin rights: $ORG2_HOSTNAME "$NONE
read -p "Provide a Username for host: $ORG2_HOSTNAME to login:" user1
echo "userone=$user1" >> .swarm.env
echo -e $YCOLOR"Cleaning if any previous installs of swarm network in host: $ORG2_HOSTNAME"$NONE
if [ $ORG1_HOSTNAME == $ORG2_HOSTNAME ]; then
    echo "..skipping Swam Join on second node,Since the both hosts names are same."
else
    echo "Connecting with Hostname..."
    ssh $user1@$ORG2_HOSTNAME docker swarm leave -f #Hash this line if its same host
    if [ $? != 0 ]; then ssh $user1@$ORG2_IPADDRESS docker swarm leave -f; fi
fi
sleep 2
# Connecting 2nd host
if [ $ORG1_IPADDRESS != $ORG2_IPADDRESS ]; then
    echo "Connecting with ipaddress..."
    ssh $user1@$ORG2_IPADDRESS docker swarm join --token $SWARM_TOKEN ${SWARM_MASTER}:2377
else
    echo "..skipping Swam Join on second node, Since the both host IPs are same."
fi
dswarmscp

}

function dswarmDBimagechg (){ #source .env #source .hlc.env export cat .hlc.env | grep DBIMAGE_TAG if [ $DBIMAGE_TAG == 0.4.15 ];then docker pull hyperledger/fabric-couchdb:0.4.15 docker tag hyperledger/fabric-couchdb:0.4.15 couchdb:0.4.15 #sed -i -e "s/COUCHDB_USER=admin/COUCHDB_USER=/g" $HL_CFG_PATH/docker-compose-cli.yaml #sed -i -e "s/COUCHDB_PASSWORD=password/COUCHDB_PASSWORD=/g" $HL_CFG_PATH/docker-compose-cli.yaml fi }

function dswarmDeploy () { dswarmDBimagechg export cat .hlc.env | grep IMAGE_TAG if [ ! -n $ORG2_HOSTNAME ] || [ ! -n $ORG2_IPADDRESS ] then
echo -e $RCOLOR"Fix the Host 2 network and rerun the script "$NONE

else 
    echo -e $PCOLOR"#### Starting Docker Stack Deploy"$NONE 
    #set -a && . .hlc.env && set +a && docker stack deploy........ #manually to start.
    source .swarm.env
    #source .swarm-var.env
    docker network create --attachable --driver overlay $SWARM_NET
    docker node ls  

    docker stack deploy -c ./swarm/org1/docker-compose-swarm-orderer.yaml hlf_orderer

    docker stack deploy -c swarm/org1/docker-compose-swarm-services.yaml hlf_services
    docker stack deploy -c swarm/org1/docker-compose-swarm-peer.yaml hlf_peer

    docker stack deploy -c swarm/org2/docker-compose-swarm-org2-services.yaml hlf_services
    docker stack deploy -c swarm/org2/docker-compose-swarm-org2-peer.yaml hlf_peer

    echo -e $BLCOLOR">>> listing the services"$NONE
    sleep 7
    docker service ls
    sleep 3
    docker stack ps hlf_services
    sleep 3
    export CLI_NAME="$(docker ps --format='{{.Names}}' | grep _cli)"
    echo "CLI_NAME=$CLI_NAME" >> .hlc.env
fi

}

function dswarmStop () {

docker stack rm hlf_services
docker stack rm hlf_peer
docker stack rm hlf_orderer

}

function dswarmCHLcreate () {

export CLI_NAME="$(docker ps --format='{{.Names}}' | grep cli)" echo "CLI_NAME=$CLI_NAME" >> .hlc.env ./scripts/2_channelcrte.sh

}

function dswarmPeerConnect () {

sleep 1
docker exec $CLI_NAME bash ./scripts/2a_peer0.org1_chljoin.sh
sleep 3

docker exec $CLI_NAME bash ./scripts/3_peer1.org1_chljoin.sh
sleep 2

docker exec $CLI_NAME bash ./scripts/4_peer0.org2_chljoin.sh
sleep 1

docker exec $CLI_NAME bash ./scripts/5_peer1.org2_chljoin.sh
sleep 1

docker exec $CLI_NAME bash ./scripts/6_anchorpeerorg1.sh
sleep 2

docker exec $CLI_NAME bash ./scripts/7_anchorpeerorg2.sh
sleep 2

docker exec $CLI_NAME bash ./scripts/8_ccinstallpeer0.org1.sh
sleep 2

docker exec $CLI_NAME bash ./scripts/9_ccinstallpeer0.org2.sh
sleep 2

if [[ $IMAGE_TAG != @(2.0.0|2.1.0|2.2.0) ]];
then 
    docker tag hyperledger/fabric-ccenv:1.4.3 hyperledger/fabric-ccenv:latest   #Bug Fix

    docker exec $CLI_NAME bash ./scripts/10_ccinstantiate.org2.sh
    sleep 2

    docker exec $CLI_NAME bash ./scripts/11_ccquery.org1.sh
    sleep 1

    docker exec $CLI_NAME bash ./scripts/12_ccinvoketransfer.sh
    sleep 3

    docker exec $CLI_NAME bash ./scripts/13_ccquery.org2.sh
else 
    echo "...skiping to fab 2.0"
    docker tag hyperledger/fabric-ccenv:2.2 hyperledger/fabric-ccenv:latest    ## Bug fix in 2.2
    sleep 2
    docker exec $CLI_NAME bash ./scripts/9a_lcccapprovefab2.0.sh
    sleep 2
    docker exec $CLI_NAME bash ./scripts/10a_lccc-commitfab2.0.sh

fi
echo ">>>>>  Peerconnect done with two org setup   <<<<< "

}

function dswarmexplorer () { source .swarm.env mkdir -p explorer/wallet

sed -i -e "s/{ORG1_HOSTNAME}/$ORG1_HOSTNAME/g" ./explorer/docker-compose-explorer.yml
cp -r crypto-config/*  explorer/examples/net1/crypto/
EXPORG1KEY="$(ls crypto-config/peerOrganizations/$ORG_1.$DOMAIN_NAME/users/Admin@$ORG_1.$DOMAIN_NAME/msp/keystore/ | grep 'sk$')"
sed -i -e "s/{ORG1-MSP-KEY}/$EXPORG1KEY/g" ./explorer/examples/net1/connection-profile/first-network.json
docker stack deploy -c ./explorer/docker-compose-explorer.yml hlf_services

}