PN532 not found

[electric-m]

When booting, I get this error:

MAC Address:      FC:B4:67:93:9A:30

Device Name:      Homekey Schloss

I (2831) gpio: GPIO[5]| InputEn: 1| OutputEn: 1| OpenDrain: 0| Pullup: 0| Pulldown: 0| Intr:0 
I (2835) gpio: GPIO[18]| InputEn: 1| OutputEn: 1| OpenDrain: 0| Pullup: 0| Pulldown: 0| Intr:0 
I (2844) gpio: GPIO[19]| InputEn: 1| OutputEn: 0| OpenDrain: 0| Pullup: 0| Pulldown: 0| Intr:0 
I (2853) gpio: GPIO[23]| InputEn: 1| OutputEn: 1| OpenDrain: 0| Pullup: 0| Pulldown: 0| Intr:0 
E (2876) NFC_SETUP: Didn't find PN53x board
Configuring LockManagement
I (2877) LockMechanism: LockMechanism > Configuring LockMechanism
I (2882) NFCAccess: NFCAccess > Configuring NFCAccess

I connected the PN532 exactly like in the documentation:

GPIO18 - SCK

GPIO19 - MISO

GPIO23 - MOSI

GPIO5 - SS

Where in the code are those pins defined?

[electric-m]

Also solved, power supply was not sufficient.

[pilot1981]

When booting, I get this error:

MAC Address:      FC:B4:67:93:9A:30

Device Name:      Homekey Schloss

I (2831) gpio: GPIO[5]| InputEn: 1| OutputEn: 1| OpenDrain: 0| Pullup: 0| Pulldown: 0| Intr:0 
I (2835) gpio: GPIO[18]| InputEn: 1| OutputEn: 1| OpenDrain: 0| Pullup: 0| Pulldown: 0| Intr:0 
I (2844) gpio: GPIO[19]| InputEn: 1| OutputEn: 0| OpenDrain: 0| Pullup: 0| Pulldown: 0| Intr:0 
I (2853) gpio: GPIO[23]| InputEn: 1| OutputEn: 1| OpenDrain: 0| Pullup: 0| Pulldown: 0| Intr:0 
E (2876) NFC_SETUP: Didn't find PN53x board
Configuring LockManagement
I (2877) LockMechanism: LockMechanism > Configuring LockMechanism
I (2882) NFCAccess: NFCAccess > Configuring NFCAccess

I connected the PN532 exactly like in the documentation:

GPIO18 - SCK

GPIO19 - MISO

GPIO23 - MOSI

GPIO5 - SS

Where in the code are those pins defined?

how do you get this logs? I need also to troubleshoot in my lab!

thanks in advance