This code example demonstrates connecting to AWS IoT over MQTT using the AnyCloud SDK for PSoC 6 MCU and CYW43xxx connectivity devices.

This code example demonstrates Over-the-Air (OTA) firmware update using the AnyCloud SDK for PSoC 6 MCU and CYW43xxx connectivity devices.

Deprecated. Use https://github.com/Infineon/mtb-example-usb-device-cdc-echo. This example demonstrates how to configure the USB block in a PSoC 6 MCU for Communication Device Class (CDC). When configured for a CDC, the PSoC 6 enumerates a Virtual COM port, which can be read and written by a terminal emulator program on PC.

This example demonstrates building a bootlaoder application for PSoC 6 using MCUboot, an open source secure bootloader for 32-bit MCUs. This bootloader app runs on CM0+.

This code example demonstrates how to run through the ModusToolbox Machine Learning (MTB-ML) development flow with PSoC 6 MCU, where the end user has a pre-trained Neural Network (NN) model, which can be profiled and validated at the PC and target device.

This example demonstrates use of the ADC (Analog to Digital Converter) HAL driver to perform voltage measurements.

This example demonstrates how to configure a GPIO to generate an interrupt in PSoC 6 MCU.

This code example demonstrates the low-power operation of PSoC 6 MCU and CYW43xxx connectivity devices using the AnyCloud Low Power Assistant (LPA) middleware library.

This example demonstrates the use of I2C (HAL) resource for PSoC6 MCU in Master mode

This code example demonstrates implementing a UDP client using the AnyCloud SDK for PSoC 6 MCU and CYW43xxx connectivity devices.

This code example demonstrates the implementation of a simple BLE Environmental Sensing Profile.

This empty application provides a template for creating applications using PSoC 6 devices.

This example demonstrates the usage of CSD analog-to-digital converter (ADC) in PSoC 6 MCU.

This code example demonstrates the implementation of a simple BLE GAP Peripheral - GATT Client with Current Time Service using the Cypress Combo (Wi-Fi+BT) SoCs

This code example demonstrates Wi-Fi provisioning via SoftAP and setting up a web server with PSoC 6 MCU and CYW43xxx connectivity devices.

This example demonstrates how to use the protection units to isolate the CM0+ from CM4.

This code example demonstrate basic device firmware update (DFU), also known as "bootloading", with PSoC® 6 MCU. This includes downloading an application from a host and installing it in device flash, and then transferring control to that application.

This code example encrypts and decrypts user input data using the AES algorithm using a 128-bit key. The encrypted and decrypted data are displayed on a UART terminal emulator.

This code example demonstrates how to interface PSoC 6 MCU with a BMI160 Motion Sensor over an I2C interface within a FreeRTOS task. This example reads raw motion data and estimates the orientation of the board.

This code example demonstrates implementing a TCP client using the AnyCloud SDK for PSoC 6 MCU and CYW43xxx connectivity devices.