The easiest way to convert CSV files to Neoden 4.

A hardware project for iSkipper

PCB Files for diyHue emulator project

Shilds for the Arduino Mega.

A Breakout Borad for the Adafruit TCA9548A I²C Multiplexer Board.

A CNY-70 based Line Sensor Board

Firmware for a climate control device/sensor, based on ESP32 DevKit board

This IOT project allows you to open and close your window from any smart house. For example - you can setup rules like a "If night and noise greater then expected -> close window" and "Noise reduced -> open window"

Design files for the One Pin Keypad, a device that simplifies the use of 16 button matrix keypads.

Automatically exported from code.google.com/p/dangerous-prototypes-open-hardware

An Evaluation Board for the STK681-332-E Motor-driver IC

Eagle files for a board to help flash and ESP8266-01

⚡ An Arduino alternative board (based on teensy 3.5) to easily build your own differential or omnidirectional robot.

Contains my most recent EAGLE Schematic and Board files

C project and Eagle PCB files for acceleration recorder wearable

This project contains schematics and firmware for controlling patry, garage, etc. Its including flooding sensor, auto air dryer and signal system. It connected to smart house using LoRa channel

Customized Eagle CAD scripts, ULPs and Libraries