fix

README.md

@@ -55,6 +55,7 @@ before calling **begin()**.
 - https://www.ti.com/document-viewer/INA226/datasheet
 - https://github.com/RobTillaart/INA219
 - https://github.com/RobTillaart/INA226
+- https://github.com/RobTillaart/INA236
 
 
 ## I2C
@@ -65,26 +66,26 @@ The sensor can have 16 different I2C addresses,
 which depends on how the A0 and A1 address lines 
 are connected to the SCL, SDA, GND and VCC pins.
 
-See table - from datasheet table 2, page18.
-
-|  A1   |  A0   |  ADDRESS   |
-|:-----:|:-----:|:----------:|
-|  GND  |  GND  |  1000000   |
-|  GND  |  VS   |  1000001   |
-|  GND  |  SDA  |  1000010   |
-|  GND  |  SCL  |  1000011   |
-|  VS   |  GND  |  1000100   |
-|  VS   |  VS   |  1000101   |
-|  VS   |  SDA  |  1000110   |
-|  VS   |  SCL  |  1000111   |
-|  SDA  |  GND  |  1001000   |
-|  SDA  |  VS   |  1001001   |
-|  SDA  |  SDA  |  1001010   |
-|  SDA  |  SCL  |  1001011   |
-|  SCL  |  GND  |  1001100   |
-|  SCL  |  VS   |  1001101   |
-|  SCL  |  SDA  |  1001110   |
-|  SCL  |  SCL  |  1001111   |
+See table - from datasheet table 2, page 18.
+
+|  A1   |  A0   |  Addr  |  HEX   |
+|:-----:|:-----:|:------:|:------:|
+|  GND  |  GND  |   64   |  0x40  |
+|  GND  |  VS   |   65   |  0x41  |
+|  GND  |  SDA  |   66   |  0x42  |
+|  GND  |  SCL  |   67   |  0x43  |
+|  VS   |  GND  |   68   |  0x44  |
+|  VS   |  VS   |   69   |  0x45  |
+|  VS   |  SDA  |   70   |  0x46  |
+|  VS   |  SCL  |   71   |  0x47  |
+|  SDA  |  GND  |   72   |  0x48  |
+|  SDA  |  VS   |   73   |  0x49  |
+|  SDA  |  SDA  |   74   |  0x4A  |
+|  SDA  |  SCL  |   75   |  0x4B  |
+|  SCL  |  GND  |   76   |  0x4C  |
+|  SCL  |  VS   |   77   |  0x4D  |
+|  SCL  |  SDA  |   78   |  0x4E  |
+|  SCL  |  SCL  |   79   |  0x4F  |
 
 
 #### Performance