Behaviorial Cloning Project

Overview

This repository contains files for the Behavioral Cloning Project.

In this project, I used convolutional neural networks to clone driving behavior. The network was trained, validated and tested using Keras. The model outputs a steering angle to an autonomous vehicle.

The data was generated and tested on the Udacity's simulator

The Project

The goals / steps of this project are the following:

• Use the simulator to collect data of good driving behavior
• Design, train and validate a model that predicts a steering angle from image data
• Use the model to drive the vehicle autonomously around the first track in the simulator. The vehicle should remain on the road for an entire loop around the track.

Details About Files In This Directory

Directors 'src' directory contains model, dataloadhelper and the behvarior cloning files which loads the data from dataloadhelper and run the cnn model 'test' directory has drive.py for testing the model and video.py for creating the video 'results' directory has output_images, model and the video 'docs' directory has the write_up for the code

drive.py

Usage of drive.py requires you have saved the trained model as an h5 file, i.e. model.h5. See the Keras documentation for how to create this file using the following command:

model.save(filepath)

Once the model has been saved, it can be used with drive.py using this command:

python drive.py model.h5

The above command will load the trained model and use the model to make predictions on individual images in real-time and send the predicted angle back to the server via a websocket connection.

Note: There is known local system's setting issue with replacing "," with "." when using drive.py. When this happens it can make predicted steering values clipped to max/min values. If this occurs, a known fix for this is to add "export LANG=en_US.utf8" to the bashrc file.

Saving a video of the autonomous agent

python drive.py model.h5 run1

The fourth argument, run1, is the directory in which to save the images seen by the agent. If the directory already exists, it'll be overwritten.

ls run1

[2017-01-09 16:10:23 EST]  12KiB 2017_01_09_21_10_23_424.jpg
[2017-01-09 16:10:23 EST]  12KiB 2017_01_09_21_10_23_451.jpg
[2017-01-09 16:10:23 EST]  12KiB 2017_01_09_21_10_23_477.jpg
[2017-01-09 16:10:23 EST]  12KiB 2017_01_09_21_10_23_528.jpg
[2017-01-09 16:10:23 EST]  12KiB 2017_01_09_21_10_23_573.jpg
[2017-01-09 16:10:23 EST]  12KiB 2017_01_09_21_10_23_618.jpg
[2017-01-09 16:10:23 EST]  12KiB 2017_01_09_21_10_23_697.jpg
[2017-01-09 16:10:23 EST]  12KiB 2017_01_09_21_10_23_723.jpg
[2017-01-09 16:10:23 EST]  12KiB 2017_01_09_21_10_23_749.jpg
[2017-01-09 16:10:23 EST]  12KiB 2017_01_09_21_10_23_817.jpg
...

The image file name is a timestamp of when the image was seen. This information is used by video.py to create a chronological video of the agent driving.

video.py

python video.py run1

Creates a video based on images found in the run1 directory. The name of the video will be the name of the directory followed by '.mp4', so, in this case the video will be run1.mp4.

Optionally, one can specify the FPS (frames per second) of the video:

python video.py run1 --fps 48