This project is used to generate the proxy auto-configuration proxy.pac file, which can be used for configuring browser or system-level proxy settings.
Supports routing traffic through proxies: You can customize rules to route traffic to different proxy servers based on domain names or IP networks specified in the configuration files.
For high-performance matching: Uses a hash table for domain rules, and an IP prefix tree for fast matching of network rules. If there is no domain match, the IP address will be resolved and then matched against network rules.
The project contains some example configuration files:
auto-proxy.txt.exampledomain-rules-blocked.txt.exampledomain-rules-direct.txt.exampledomain-rules-proxy.txt.exampleipv4-rules-direct.txt.exampleipv6-rules-direct.txt.example
To use these files, remove the .example extension. Each file represents a different proxy behavior:
- Auto-Proxy Rules: Add rules to
auto-proxy.txtto control how websites are accessed.
All files starting with auto-proxy and ending with .txt will be parsed as Auto-Proxy rules. If you have multiple Auto-Proxy rules, you can save them as multiple files, like auto-proxy-1.txt, auto-proxy-2.txt, etc.
Note: Currently, the URL matching rules in Auto-Proxy are ignored, and only domain rules are handled.
- Blocked: Domains added to
domain-rules-blocked.txtwill be blocked from access. - Direct:
- Domains added to
domain-rules-direct.txtwill bypass the proxy and connect directly. - IPv4 networks (in CIDR format) added to
ipv4-rules-direct.txtwill bypass the proxy and connect directly. - IPv6 networks (in CIDR format) added to
ipv6-rules-direct.txtwill bypass the proxy and connect directly.
- Domains added to
- Proxy: Domains added to
domain-rules-proxy.txtwill use the default proxy.
Add your domains or IP networks to the appropriate file, one per line. Subdomains will inherit the proxy behavior of their parent domain. You can also add country-level top domains to simplify the configuration. Lines starting with # are treated as comments.
For example:
Domains added to domain-rules-direct.txt, along with their subdomains, will bypass the proxy and connect directly:
# Direct connect domains
cn # All domains ending with .cn will connect directly by default
google.com
example.org
IPv4 Networks added to ipv4-rules-direct.txt will bypass the proxy and connect directly:
# Direct connect IPv4 networks
192.168.0.0/16
114.114.114.114/32 # To add a specific IP address, append /32 to the IP address
You can also create your own custom rule files, following the format <domain|ipv4|ipv6>-rules-<rule_name>.txt. For example, domain-rules-companyProxy.txt will make all domains in this file use the companyProxy setting defined in proxy.pac. ipv4-rules-block.txt will block all networks listed in the file.
- Domain Regular Expressions:
domain-regexp.txtis used to define domain rules based on regular expressions, which allows for flexible matching of similar domains.
File structure:
[direct]
# host regex ...
[blocked]
# ...
[proxy]
# ...
Each section represents a different proxy behavior, which can be direct, blocked, proxy, or a custom behavior (e.g., [companyProxy]).
- [direct]: Domains matched by regular expressions in this section will bypass the proxy and connect directly.
- [blocked]: Domains matched by regular expressions in this section will be blocked.
- [proxy]: Domains matched by regular expressions in this section will use the default proxy.
- Custom Behavior: You can add your own section name, such as
[companyProxy], to indicate that domains matching those patterns will use a custom proxy configuration.
Each line is a regular expression for matching specific domains or their subdomains. Lines starting with # are treated as comments. For example:
[direct]
# Direct connection domains
^img-[0-9][0-9].*\.example\.com$
[blocked]
# Blocked domains
^ad-[a-z0-9]\.cdn[0-9]\.example\.com$
Ensure that the regular expressions are valid to avoid affecting normal network access.
Run the script to generate the proxy.pac file:
./build.shThe proxy.pac file will be automatically generated in the project root directory.
The build script build.sh will, by default, download the following files without overwriting existing files of the same name:
auto-proxy.txtipv4-rules-direct.txtipv6-rules-direct.txt
If you do not need the Auto-Proxy rules or IP networks rules, you can create empty files with the same name to skip the download.
The generated proxy.pac file uses the following default proxy configurations (note that the default proxy server is SOCKS5 127.0.0.1:1080):
var proxyBehaviors = {
proxy: "SOCKS5 127.0.0.1:1080", // Default proxy
direct: DIRECT,
blocked: "PROXY 0.0.0.0:0",
"http_proxy": "PROXY 127.0.0.1:3128",
"companyProxy": "PROXY 192.168.1.1:8080", // Domains in `domain-rules-companyProxy.txt` will use this proxy setting
};You can modify these values after generating proxy.pac, or customize them directly in the original script proxy.js to use different default settings. Please adjust these settings according to your environment and requirements.
If you have Node.js installed, you can run the following command to test and verify the configuration:
node proxy.pac testThe test code is located at the end of the proxy.pac file, for example:
assertVisitHostWithProxy("com.google");
assertVisitHostWithProxy("domains.google");
assertHostWithDefaultAction("www.not-google");
assertDirectHost("10.3.4.5");
assertDirectHost("114.114.114.114");
assertBlockedHost("www.whitehouse.com");To add a domain that needs to be blocked, simply edit the domain-rules-blocked.txt file:
# Blocked domains
example.com
ads.example.net
Run ./build.sh to regenerate the proxy.pac file, which will block access to example.com and ads.example.net.
这个项目用来生成代理自动配置 proxy.pac 文件，可以用于配置浏览器或系统级的代理设置。
支持路由代理流量：你可以自定义规则，根据配置文件中指定的域名或者 IP 网络段来路由流量到不同的代理服务器。
为了高性能匹配：使用哈希表来匹配域名规则，使用 IP 地址前缀树来快速匹配网络段规则。如果没有匹配的域名规则，会解析 IP 地址后再按网络地址段匹配一次。
项目包含一些示例配置文件：
auto-proxy.txt.exampledomain-rules-blocked.txt.exampledomain-rules-direct.txt.exampledomain-rules-proxy.txt.exampleipv4-rules-direct.txt.exampleipv6-rules-direct.txt.exampledomain-regexp.txt.example
要使用这些文件，去掉 .example 扩展名。每个文件代表不同的代理行为：
- Auto-Proxy 配置的规则：把规则添加到
auto-proxy.txt中，将会按照规则来访问网站。
所有以 auto-proxy 开头，并且以 .txt 结尾的文件都按 Auto-Proxy 规则来解析。如果你有多个 Auto-Proxy 规则，可以保存为多个文件，例如 auto-proxy-1.txt、auto-proxy-2.txt 等等。
注意：当前，会忽略 Auto-Proxy 中的 URL 的匹配规则，仅仅处理域名规则。
- Blocked：添加到
domain-rules-blocked.txt中的域名将被阻止访问。 - Direct：
- 添加到
domain-rules-direct.txt中的域名将绕过代理，直接连接。 - 添加到
ipv4-rules-direct.txt中的 IPv4 网络段（CIDR格式）将绕过代理，直接连接。 - 添加到
ipv6-rules-direct.txt中的 IPv6 网络段（CIDR格式）将绕过代理，直接连接。
- 添加到
- Proxy：添加到
domain-rules-proxy.txt中的域名将使用默认代理。
将你的域名或者IP网络段添加到合适的文件中，每个域名一行。子域名会继承父域名的代理行为，可以直接添加国家顶级域，以简化配置。以 # 开头的行被视为注释。
例如：
文件 domain-rules-direct.txt 中添加的域名及其子域名将会绕过代理直接连接
# 直连域名
cn # 默认所有以 .cn 结尾的域名都是直连
google.com
example.org
文件 ipv4-rules-direct.txt 中添加的网络段将会绕过代理直接连接
# 直连的 IPv4 网络段
192.168.0.0/16
114.114.114.114/32 # 如果要添加一个特定 IP 地址，请追加 /32 到 IP 地址后面
你也可以创建自己的自定义规则文件，文件名应遵循 <domain|ipv4|ipv6>-rules-<rule_name>.txt 的格式。例如，domain-rules-companyProxy.txt 将使该文件中的所有域名使用 proxy.pac 中定义的 companyProxy 设置。ipv4-rules-block.txt 将不可访问文件中的所有网络段。
- 域名正则表达式：
domain-regexp.txt用于灵活地定义基于正则表达式的域名规则。主要用于匹配大量相似的域名规则。
文件结构如下：
[direct]
# host regex ...
[blocked]
# ...
[proxy]
# ...
每个分段的名称代表不同的代理行为，可以是 direct、blocked、proxy，或者你自定义的行为（例如 [companyProxy]）。
- [direct]：在这一分段中的域名正则表达式将绕过代理，直接连接。
- [blocked]：在这一分段中的域名正则表达式将被阻止访问。
- [proxy]：在这一分段中的域名正则表达式将使用默认代理进行连接。
- 自定义行为：你可以新增自己的分段名称，例如
[companyProxy]，表示这些匹配的域名将使用自定义代理配置。
每一行是一个域名的正则表达式，可以通过灵活的正则规则来匹配特定的域名或其子域名。以 # 开头的行被视为注释。例如：
[direct]
# 直连的域名
^img-[0-9][0-9].*\.example\.com$
[blocked]
# 阻止访问的域名
^ad-[a-z0-9]\.cdn[0-9]\.example\.com$
确保正则表达式是有效的，以免影响正常的网络访问行为。
运行脚本生成 proxy.pac 文件：
./build.sh在项目根目录中会自动生成 proxy.pac 文件。
构建脚本 build.sh 默认会下载以下文件，但不会覆盖已有的同名文件：
auto-proxy.txtipv4-rules-direct.txtipv6-rules-direct.txt
如果你不需要 Auto-Proxy 的规则或者 IP 网络段的规则，请创建同名的空文件即可忽略下载。
生成的 proxy.pac 文件使用以下默认的代理配置（注意默认代理服务器是 SOCKS5 127.0.0.1:1080）：
var proxyBehaviors = {
proxy: "SOCKS5 127.0.0.1:1080", // 默认代理
direct: DIRECT,
blocked: "PROXY 0.0.0.0:0",
"http_proxy": "PROXY 127.0.0.1:3128",
"companyProxy": "PROXY 192.168.1.1:8080", // `domain-rules-companyProxy.txt` 中的域名将使用此代理设置
};你可以在生成 proxy.pac 后修改这些值，或者直接在原始脚本 proxy.js 中进行自定义，以便使用不同的默认设置。请根据实际环境和需求调整这些代理设置。
如果安装了 Node.js，可以使用以下命令运行测试以验证配置：
node proxy.pac test测试代码位于 proxy.pac 文件的末尾，例如：
assertVisitHostWithProxy("com.google");
assertVisitHostWithProxy("domains.google");
assertHostWithDefaultAction("www.not-google");
assertDirectHost("10.3.4.5");
assertDirectHost("114.114.114.114");
assertBlockedHost("www.whitehouse.com");要添加一个需要被阻止的域名，只需编辑 domain-rules-blocked.txt 文件：
# 被阻止的域名
example.com
ads.example.net
运行 ./build.sh 重新生成的 proxy.pac 将阻止访问 example.com 和 ads.example.net。
This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version.
This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.
You should have received a copy of the GNU General Public License along with this program. If not, see https://www.gnu.org/licenses/.