mROS 2 (mros2 as casually codename) realizes a agent-less and lightweight runtime environment compatible with ROS 2 for embedded devices.
mROS 2 mainly offers pub/sub APIs compatible with rclcpp for embedded devices.
mROS 2 consists of communication library for pub/sub APIs, RTPS protocol, UDP/IP stack, and real-time kernel. This repository provides the reference implementation of mROS 2 that can be operated on the Espressif Systems ESP32 boards. Please also check mros2 repository for more details and another implementations.
- ESP32 board
- For now, these boards below are confirmed to run the example on them.
- These boards below are also confirmed but not always supported in the latest version (due to our development resources,,,).
- Kernel: ESP-IDF FreeRTOS
- Host environment
- ROS 2 Humble Hawksbill on Ubuntu 22.04 LTS
- Network setting
- Make sure both the device and the host are connected to the same network.
- IP address needs to be assigned to the device by DHCP. We have not confirmed the operation using static IP setting yet. So you may not un-comment the
#define STATIC_IPline inplatform/wifi/wifi.h. - Please prepare the Wi-Fi router that provides 2.4 GHz band.
- Most of ESP32 only support 2.4 GHz.
- Note that you need to set up a dedicated SSID at 2.4 GHz. If the SSID has a band steering setting (that shares 2.4 GHz and 5 GHz), the communication of ESP32 may be disconnected during the operation.
- The firewall on the host (Ubuntu) needs to be disabled for ROS 2 (DDS) communication (e.g.
$ sudo ufw disable). - If the host is connected to the Internet with other network adapters, communication with mros2 may not work properly. In that case, please turn off them.
First, please install ESP-IDF as the toolchain for ESP32 family.
We recommend to install it followed "Maunal Installation".
https://docs.espressif.com/projects/esp-idf/en/latest/esp32/get-started/index.html#manual-installation
Currently, we checked the operation of basic sapmles with esp-idf v5.1.1.
Building mros2 library requires Jinja2 (to generate platform/templates.hpp automatically). So please install this as the below.
$ pip install -U Jinja2
This repository contains mros2 libarary with its related implementations for ESP32, and some examples in workspace/.
IOW, this repository is all you need to try it out about the power of mros2-esp32 right away!!
This sections describes the quickstart with workspace/echoback_string as the examples.
You can also use this repositoy as a component in your own ESP-IDF project. If you want to do so, please refer to Usage into your own ESP-IDF project in the next section.
Please git clone this repository with --recursive (mandatory).
git clone --recursive https://github.com/mROS-base/mros2-esp32.git
cd mros2-esp32
Note that you cannot change the directory name from mros2-esp32 since it is used as the component name in CMakeLists.txt.
We support Wi-Fi and Ethernet. User idf.py menuconfig and go to mROS Settings -> mROS network interface select to choose the mode. Note that only one mode is supported at the same time.
Please setup SSID and PASS for your Wi-Fi AP in idf.py menuconfig and go to mROS Settings -> Wifi Configuration (be careful that we should not commit and push your network environment to the world :D)
Again, make sure that its SSID assigns IP by DHCP and is dedicated to 2.4 GHz band.
See the configuration guidline of espressif to setup your ethernet correctly.
We selected the default settings to support the following boards out of the box:
Go to workspace/echoback_string/ and do the below to setup the target device.
You need to adjust <target> arg for your device (e.g., M5Stack Basic and Core2 for esp32, ESP32S3Dev and M5Stack CoreS3 for esp32s3)
cd workspace/echoback_string
idf.py set-target esp32
Next, you need to disable IPv6 connection for lwIP, since RTPS communication cannot work well when it is enabled.
Please do idf.py menuconfig, move to "Component config" -> "LWIP" -> "Enable IPv6" and --->" and type Space to disable it.
The below image is from @tasada038's article: 「mros2-esp32とM5Stackでサンプルプログラムを試す」
If you are afraid to fiddle with this screen, you can skip this step because disabling IPv6 will be disabled automatically during the build process. However, you need to run the build twice in a row for proper configuration in this case.
Please build the project as the below command.
idf.py build
When the build completed successfully, a binary is generated in build/echoback_string.bin.
Connect the device to the host via USB cable, and flash the binary to it.
The port /tty/ttyUSB0 may be adjusted according to your target board and development environment.
idf.py -p /tty/ttyUSB0 flash
Finally, ron-yori-Run!
You can observe the serial terminal by IDF Monitor
(quit is Ctrl + ]).
$ idf.py -p /tty/ttyUSB0 monitor
Executing action: monitor
Running idf_monitor in directory /home/hogehoge/mros2-esp32/workspace/echoback_string
...(SNIPPED)...
I (2208) esp_netif_handlers: sta ip: 192.168.11.102, mask: 255.255.255.0, gw: 192.168.11.1
I (2208) wifi station: got ip:192.168.11.102
I (2208) wifi station: connected to ap SSID:SSID password:PASS
LOG_DEBUG : 00000000.182 : [MROS2LIB] set "192.168.11.102" for RTPS communication
LOG_NOTICE : 00000000.182 : successfully connect and setup network
---
LOG_NOTICE : 00000000.183 : mros2-esp32 start!
LOG_NOTICE : 00000000.183 : app name: echoback_string
LOG_DEBUG : 00000000.184 : [MROS2LIB] mros2_init task start
LOG_DEBUG : 00000000.184 : [MROS2LIB] Initilizing lwIP complete
LOG_DEBUG : 00000000.185 : mROS 2 initialization is completed
LOG_DEBUG : 00000000.186 : [MROS2LIB] create_node
LOG_DEBUG : 00000000.186 : [MROS2LIB] start creating participant
LOG_DEBUG : 00000000.187 : [MROS2LIB] successfully created participant
LOG_DEBUG : 00000000.187 : [MROS2LIB] create_publisher complete.
LOG_DEBUG : 00000000.188 : [MROS2LIB] create_subscription complete.
LOG_DEBUG : 00000000.195 : [MROS2LIB] Initilizing Domain complete
LOG_NOTICE : 00000000.198 : ready to pub/sub message
---
LOG_NOTICE : 00000000.198 : publishing msg: 'Hello from mros2-esp32 onto "ESP32": 0'
LOG_NOTICE : 00000000.298 : publishing msg: 'Hello from mros2-esp32 onto "ESP32": 1'
LOG_NOTICE : 00000000.398 : publishing msg: 'Hello from mros2-esp32 onto "ESP32": 2'
LOG_NOTICE : 00000000.498 : publishing msg: 'Hello from mros2-esp32 onto "ESP32": 3'
...(SNIPPED)...
You can confirm proper connection with your AP (SSID and PASS), and gotten IP address that will also be set for RTPS communication.
To confirm the operation of this echoback_string example, please operate mros2-host-examples/mros2_echoreply_string node on the ROS 2 host as the below.
$ ros2 run mros2_echoreply_string echoreply_node
[INFO] [1695193182.117751738] [mros2_echoreply_node]:
Subscribed msg: 'Hello from mros2-esp32 onto "ESP32": 11'
[INFO] [1695193182.117877196] [mros2_echoreply_node]:
Publishing msg: 'Hello from mros2-esp32 onto "ESP32": 11'
[INFO] [1695193183.115781171] [mros2_echoreply_node]:
Subscribed msg: 'Hello from mros2-esp32 onto "ESP32": 12'
[INFO] [1695193183.115852751] [mros2_echoreply_node]:
Publishing msg: 'Hello from mros2-esp32 onto "ESP32": 12'
[INFO] [1695193184.160837237] [mros2_echoreply_node]:
Subscribed msg: 'Hello from mros2-esp32 onto "ESP32": 13'
[INFO] [1695193184.160930132] [mros2_echoreply_node]:
Publishing msg: 'Hello from mros2-esp32 onto "ESP32": 13'
[INFO] [1695193185.185828052] [mros2_echoreply_node]:
Subscribed msg: 'Hello from mros2-esp32 onto "ESP32": 14'
[INFO] [1695193185.185916568] [mros2_echoreply_node]:
Publishing msg: 'Hello from mros2-esp32 onto "ESP32": 14'
...(SNIPPED)...
After that, mros2-esp32 and ROS 2 host can be connected directly via RTPS!
...(SNIPPED)...
LOG_NOTICE : 00000001.245 : publishing msg: 'Hello from mros2-esp32 onto "ESP32": 9'
LOG_NOTICE : 00000001.345 : publishing msg: 'Hello from mros2-esp32 onto "ESP32": 10'
LOG_DEBUG : 00000001.397 : [MROS2LIB] publisher matched with remote subscriber
LOG_NOTICE : 00000001.445 : publishing msg: 'Hello from mros2-esp32 onto "ESP32": 11'
LOG_NOTICE : 00000001.446 : subscribed msg: 'Hello from mros2-esp32 onto "ESP32": 11'
LOG_NOTICE : 00000001.545 : publishing msg: 'Hello from mros2-esp32 onto "ESP32": 12'
LOG_NOTICE : 00000001.545 : subscribed msg: 'Hello from mros2-esp32 onto "ESP32": 12'
LOG_DEBUG : 00000001.611 : [MROS2LIB] subscriber matched with remote publisher
LOG_NOTICE : 00000001.645 : publishing msg: 'Hello from mros2-esp32 onto "ESP32": 13'
LOG_NOTICE : 00000001.650 : subscribed msg: 'Hello from mros2-esp32 onto "ESP32": 13'
LOG_NOTICE : 00000001.745 : publishing msg: 'Hello from mros2-esp32 onto "ESP32": 14'
LOG_NOTICE : 00000001.755 : subscribed msg: 'Hello from mros2-esp32 onto "ESP32": 14'
...(SNIPPED)...
This repository contains some example applications in workspace/ to communicate with ROS 2 nodes on the host.
The followings are the basic communication examples to the host. The description and host operation of them are almost the same with mros2-mbed#Examples (link is to mros2-mbed ripository). Please also check mROS-base/mros2-host-examples repository for more detail about the host examples.
The followings are under development and not confirmed the proper operation yet (also see Issue#14)
The followings is for M5Stack device.
You need to do git clone M5Unified and M5GFX in components/, and use ESP-IDF v4.4.4 to try this sample due to the compatibility of these libraries.
- m5stack_sample
We are sure that you definiately want to use mros2-esp32 into your onw ESP-IDF project!
This section introduce how to realize it, assuming the project name is "hello_mros2" and the location is ~/esp/.
Go to your own location and create the hello_mros2 project.
cd ~/esp
idf.py create-project hello_mros2
cd hello_mros2
First, create ./components and do git clone into it (--recursive is mandatory).
mkdir components
cd components/
git clone --recursive https://github.com/mROS-base/mros2-esp32
You need to change filename (.ext) from main/hello_mros2.c to main/hello_mros2.cpp because you will use mros2 C++ APIs.
mv main/hello_mros2.c main/hello_mros2.cpp
You need to edit ./CMakeLists.txt and ./main/CMakeLists.txt as the below.
./CMakeLists.txtcmake_minimum_required(VERSION 3.16) add_compile_options(-w) # add include($ENV{IDF_PATH}/tools/cmake/project.cmake) project(hello_mros2)- This is due to avoid build error about
-Werror=formatin mros2-esp32 logging functions. See #Issue16 for details.
- This is due to avoid build error about
./main/CMakeLists.txtidf_component_register(SRCS "hello_mros2.cpp" # edit INCLUDE_DIRS "." PRIV_REQUIRES "mros2-esp32") # add
The fastest way is to copy from ./workspace/echoback_string/main/echoback_string.cpp :D
cd ~/esp/hello_mros2
cp components/mros2-esp32/workspace/echoback_string/main/echoback_string.cpp main/hello_mros2.cpp
You need to SSID and PASS for your Wi-Fi AP in components/mros2-esp32/platform/wifi/wifi.h (be careful that we should not commit and push your network environment to the world :D)
#define ESP_WIFI_SSID "SSID"
#define ESP_WIFI_PASS "PASS"The rest of operations follow from this subsection on Quickstart.
If you want to use your own customized message type followed by the ROS 2 manner, please refer to mros2#generating-header-files-for-custom-msgtypes section.
Enjoy your mros2-esp32 development life!! 🎉
The source code of this repository itself is published under Apache License 2.0.
Please note that this repository requires the following stacks as the submodules, and also check their Licenses.
- mros2: the pub/sub APIs compatible with ROS 2 Rclcpp
- embeddedRTPS: RTPS communication layer (including lwIP and Micro-CDR)
- ESP-IDF and FreeRTOS: Espressif IoT Development Framework. Official development framework for Espressif SoCs.
The following are trial reports written by third-party users. We deeply appreciate your contributions! Of course, PR for adding your reports/articles, example of works are very welcome!!