Note Select

Note Select / Step Parameters

Long press a step key to enter this mode. Here you can change the note values (note number, velocity, note length and octave), set CC parameter-lock values with the knobs, and set step parameters (step events, step probability, trig conditions).

While in Note Select, the rightmost and leftmost keys will blink (orange or blue)- these 2 keys will shift the current octave up or down.

Press AUX to exit Note Select.

Parameters:

Page 1:

• NOTE: midi note number
• OCT: octave
• VEL: note velocity
• LEN: note length in steps (1-16)

Page 2:

• TYPE: step event type (see below)
• PROB: percentage of the step triggering
• COND: trig conditions (see below)

Page 3: (set CC parameter-locks)

• L-1: pot 1 p-lock value for this step
• L-2: pot 2 p-lock value for this step
• L-3: pot 3 p-lock value for this step
• L-4: pot 4 p-lock value for this step

Touching any potentiometer while in Note Select will set that p-lock value.

To reset/erase a p-lock - Highlight the parameter and turn the encoder to the left.

Step Events (TYPE): "-" mute "+" play "1" reset to first step ">>" set parttern direction forward "<<" set parttern direction reverse "#?" jump to random step number "?" set random event (of any of the previous events) for that one step

Trig conditions - A/B Ratios (COND): Play that step on the A cycle of B total cycles (or bars) of the pattern. Default is 1:1 (every time). First number - play step on that cycle thru the pattern Second number - resets the counter after that pattern cycle.

So 1:4 would play on the first cycle, not play on the next three and then reset (after the 4th cycle). 3:8 would play only the 3rd cycle and reset after the 8th.