Golang FTP Server library

The goal is to provide a simple & comprehensive FTP Server library.

Note: this is a fork of andrewarrow/paradise_ftp but many things have been changed since then.

Current status of the project

Features

• Uploading and downloading files
• Directory listing (LIST + MLST)
• File and directory deletion and renaming
• TLS support (AUTH + PROT)
• File download/upload resume support (REST)
• Complete driver for all the above features
• Passive socket connections (EPSV and PASV commands)
• Active socket connections (PORT command)
• Small memory footprint
• Only relies on the standard library except for logging which uses go-kit log.
• Supported extensions:
  • MDTM - File Modification Time
  • MLST - Directory listing for maching processing
  • REST - Restart of interrupted transfer
  • SIZE - Size of a string
  • AUTH - Control session protection
  • PROT - Transfer protection

Quick test with docker

A demo server is shipped so that you can fully understand how you can use it, you can test it with the following container (less than 15MB image, based on alpine):

# Creating a storage dir
mkdir data

# Starting the sample FTP server
docker run -d -p 2121-2200:2121-2200 -v $(pwd)/data:/data fclairamb/ftpserver:travis-171

# Connecting to it and uploading a file
ftp ftp://test:test@localhost:2121
!wget -c -O ftpserver-v0.3 https://github.com/fclairamb/ftpserver/releases/download/v0.3/ftpserver
put ftpserver-v0.3 ftpserver-v0.3
quit
ls -lh data/ftpserver-v0.3

The driver

The API

// ServerDriver handles the authentication and ClientHandlingDriver selection
type ServerDriver interface {
	// Load some general settings around the server setup
	GetSettings() *Settings

	// WelcomeUser is called to send the very first welcome message
	WelcomeUser(cc ClientContext) (string, error)

	// UserLeft is called when the user disconnects, even if he never authenticated
	UserLeft(cc ClientContext)

	// AuthUser authenticates the user and selects an handling driver
	AuthUser(cc ClientContext, user, pass string) (ClientHandlingDriver, error)

	// GetCertificate returns a TLS Certificate to use
	// The certificate could frequently change if we use something like "let's encrypt"
	GetTLSConfig() (*tls.Config, error)
}

// ClientHandlingDriver handles the file system access logic
type ClientHandlingDriver interface {
	// ChangeDirectory changes the current working directory
	ChangeDirectory(cc ClientContext, directory string) error

	// MakeDirectory creates a directory
	MakeDirectory(cc ClientContext, directory string) error

	// ListFiles lists the files of a directory
	ListFiles(cc ClientContext) ([]os.FileInfo, error)

	// OpenFile opens a file in 3 possible modes: read, write, appending write (use appropriate flags)
	OpenFile(cc ClientContext, path string, flag int) (FileStream, error)

	// DeleteFile deletes a file or a directory
	DeleteFile(cc ClientContext, path string) error

	// GetFileInfo gets some info around a file or a directory
	GetFileInfo(cc ClientContext, path string) (os.FileInfo, error)

	// RenameFile renames a file or a directory
	RenameFile(cc ClientContext, from, to string) error

	// CanAllocate gives the approval to allocate some data
	CanAllocate(cc ClientContext, size int) (bool, error)
}

// ClientContext is implemented on the server side to provide some access to few data around the client
type ClientContext interface {
	// Get current path
	Path() string

	// SetDebug activates the debugging of this connection commands
	SetDebug(debug bool)

	// Debug returns the current debugging status of this connection commands
	Debug() bool
	
	// Client's ID on the server
	ID() uint32

	// Client's address
	RemoteAddr() net.Addr
}

// FileStream is a read or write closeable stream
type FileStream interface {
	io.Writer
	io.Reader
	io.Closer
	io.Seeker // <-- Will be used for "REST" command
}

// Settings define all the server settings
type Settings struct {
	ListenHost     string     // Host to receive connections on
	ListenPort     int        // Port to listen on
	PublicHost     string     // Public IP to expose (only an IP address is accepted at this stage)
	MaxConnections int        // Max number of connections to accept
	DataPortRange  *PortRange // Port Range for data connections. Random one will be used if not specified
}

Sample implementation

Have a look at the sample driver. It shows how you can plug your FTP server to something else, in this case your file system.

Sample run

$ ftp ftp://a:a@localhost:2121
Trying ::1...
Connected to localhost.
220 Welcome on https://github.com/fclairamb/ftpserver
331 OK
230 Password ok, continue
Remote system type is UNIX.
Using binary mode to transfer files.
200 Type set to binary
ftp> put iMX7D_RM_Rev_B.pdf 
local: iMX7D_RM_Rev_B.pdf remote: iMX7D_RM_Rev_B.pdf
229 Entering Extended Passive Mode (|||62362|)
150 Using transfer connection
100% |******************************************************************************************************************************************************************| 44333 KiB  635.92 MiB/s    00:00 ETA
226 OK, received 45397173 bytes
45397173 bytes sent in 00:00 (538.68 MiB/s)
ftp> cd virtual
250 CD worked on /virtual
ftp> ls
229 Entering Extended Passive Mode (|||62369|)
150 Using transfer connection
-rw-rw-rw- 1 ftp ftp         1024 Sep 28 01:44 localpath.txt
-rw-rw-rw- 1 ftp ftp         2048 Sep 28 01:44 file2.txt

226 Closing data connection, sent some bytes
ftp> get localpath.txt
local: localpath.txt remote: localpath.txt
229 Entering Extended Passive Mode (|||62371|)
150 Using transfer connection
    67      241.43 KiB/s 
226 OK, sent 67 bytes
67 bytes received in 00:00 (160.36 KiB/s)
ftp> ^D
221 Goodbye
$ more localpath.txt 
/var/folders/vk/vgsfkf9975xfrc4_fk102g200000gn/T/ftpserver020090599
$ shasum /var/folders/vk/vgsfkf9975xfrc4_fk102g200000gn/T/ftpserver020090599/iMX7D_RM_Rev_B.pdf 
03b3686b31867fb14d3f3a61e20d28a029883a32  /var/folders/vk/vgsfkf9975xfrc4_fk102g200000gn/T/ftpserver020090599/iMX7D_RM_Rev_B.pdf
$ more localpath.txt 
$ shasum iMX7D_RM_Rev_B.pdf 
03b3686b31867fb14d3f3a61e20d28a029883a32  iMX7D_RM_Rev_B.pdf

History of the project

I wanted to make a system which would accept files through FTP and redirect them to something else. Go seemed like the obvious choice and it seemed there was a lot of libraries available but it turns out none of them were in a useable state.

• micahhausler/go-ftp is a minimalistic implementation
• shenfeng/ftpd.go is very basic and 4 years old.
• yob/graval is 3 years old and “experimental”.
• goftp/server seemed OK but I couldn't use it on both Filezilla and the MacOs ftp client.
• andrewarrow/paradise_ftp - Was the only one of the list I could test right away. Still, it missed few features, had some unecessary ones and I wanted to architecture it a bit differently.

That's why I forked from this last one.