by Maciej 'YTM/Elysium' Witkowiak 6-6-99, 18-8-99, 18/29-2-2000, 2014
This archive contains FULL source code of GEOS KERNAL v2.0, english version. It is identical to original in critical points but the code is revised, optimized, reorganized and first steps towards modularizing are made.
This package comes from full disassembling of GEOS KERNAL. I did it for my own pleasure and purposes in my spare time. It is meant for customizing the code and not for making big bucks on it. If you want to use GEOS KERNAL generated from these sources you need to have an original copy of GEOS, because you can do nothing without DeskTop, applications and so.
Although I have throughly tested it I cannot guarantee that it will work on any hardware configuration and with any applications.
The only tool required is ACME (version at least 0.07). It may be obtained from: http://sourceforge.net/projects/acme-crossass/ Bash shell is helpful and existance of c1541 from VICE package will be good too. You will probably want to have pucrunch from https://github.com/mist64/pucrunch Base distribution of these sources is intended for UNIX systems, but ACME in DOS will do too. To compile the kernel simply do
make
It will work flawlessly if you have c1541 and pucrunch. Anyway if you only have ACME make will stop after assembling the system and you will have geoskernal.bin file ready for loading into c64 and SYS $5000.
Look into inc/equ.inc file - there are many true/false defines, you are free to change them. But read the comments. You can compile-in input and disk drivers so right after boot you will have your drivers (and you can boot from 1571/81 without any problems). In case that input driver is compiled into KERNAL you have to delete all input driver files from boot disk, because DeskTop will try to load the first one overriding compiled driver. If you have C128 it is worth to enable 2MHz support - CPU is warped into 2MHz on the border. This is better than add-on that I saw somewhere, because my version will not flicker anytime and that add-on will not work with this kernal. (not a single application that modifies GEOS KERNAL directly will not work).
Use Makefile for creating a binary file and a disk image with it. It will be placed on top of the source tree. 'geoskern.bin' is the binary file 'geoskern.puc' is the crunched binary (just RUN it) 'geosboot.d64' is the disk image
If you don't have pucrunch simply move geoskernal.bin to c64 disk and treat it with any squeezer/cruncher. Even charpackers will be good. Let's say that you have crunched the KERNAL and saved the file as GEOS.PRG. From now on you can boot the system by simply loading and RUNning this file.
To make a new boot disk: Prepare a blank disk, copy DeskTop, auto-execs (Configure etc.) there, your input driver (if it is different than that compiled into KERNAL), printer driver and whatever you want. Oops, I would have forget - of course copy your packed KERNAL there also.
make clean
will remove all output files from the source tree.
Execute MAKEGEOS.BAT file, it will try to assemble the whole thing. I don't have pucrunch for DOS, so you will have uncompressed output file - geoskern.bin. Move it to a disk (image) and compress on c64 or execute - start and load address is $5000 - e.g.
LOAD "GEOSKERN.BIN",8,1
SYS20480
Source code is organized in a specific way. You can browse through it easier by using some keypoints:
All global labels are identical to those from geosSym and geosMac files. All OS_JUMPTAB functions are preceded with '_'. For example EnterDeskTop is placed in jumptab as:
EnterDeskTop JMP _EnterDeskTop
(...)
_EnterDeskTOp ; code for handling this function
All other labels are meant to descript the purpose of a subroutine. It was not always possible, so you may find some UNK_xxx, xxxHelp_xx and lots of procedures with the same name but different number e.g. Font11, Font12 etc. In current version all labels are global and these which should be local are made by abbreviation of the subroutine with a number on its end. In future releases it will be fixed and named ACME !zone(s) will be used.
This goes like that:
[tab2] [tab6]
Label LDA #0 ;$xxxx
CPU opcodes are always on 1st or 2nd tab. If it is 1st tab position, it means that the purpose of current/called subroutine/memory location is unknown. Comments are always on 6th tab position. The source is full of ;$xxxx comments. It is relict from disassembling the KERNAL - those marks helped me a lot when debugging. Currently the values there are wrong because code is optimized and reorganized. They will be removed in future releases.
./bin - all binary files goes there ./inc - all include files ./src - all source files
subdirectories of ./bin and ./src ./drv - disk drivers code/binary ./input - input drivers code/binary
Description of sources can be found at top of each file.
Well, the sources are not yet commented very much, but the labels are very descriptive (as for me anyway). You should obtain the GEOS Programmer's Reference Book (by Alexander Boyce) for full description of all jumptab functions and many GEOS data structures. This document is available in text and HTML format from ftp.funet.fi/pub/cbm/[somewhere...] ftp.elysium.pl/tools/systems/geos/docs [or /programming]
And reverse-engineer :} Maciej Witkowiak ytm@elysium.pl
Have fun!